virtualchuck
08-04-2014, 10:51 AM
(I'm going to try my best and follow the rules here for selling items, so admins feel free to let me know if I need to change anything)
I am doing a swap and of course have many parts available to someone that may need them.
A complete low mileage engine (21k) that was "running" (note the " ") when pulled. As of now I know for sure it needs the KJet rebuilt, otherwise I have spent quite a bit of time cleaning it up, and there are many new parts on it. If someone is needing a complete engine as a starting point for a restoration, this may be a good deal for you. I also have lots of brand new parts such as an accumulator, filter, stainless lines, new injectors, etc... That I could include if the price is right and they are needed. If not these parts will be available next.
It did have several broken bolts that were extracted and replaced with larger, and may possibly have had a minor puncture to the coolant jacket from a broken intake manifold bolt PO badly tried to repair (I really can't be sure) but this was recently professionally repaired and seems to have been corrected.
I'm putting a random starting price of $5k on it.
http://img.tapatalk.com/d/14/08/04/jujahuge.jpg
A complete manual gearbox, as well as "most" of the parts you would need if you are doing a auto/manual swap. (Minus pedal and clutch line) There appears to be an issue where the passenger side output is "sticking" I haven't had it opened to investigate, but expect that it will need some servicing. Again random price of $5k for that.
http://img.tapatalk.com/d/14/08/04/uzusy5u5.jpg
Items are located in N.W. Indiana about an hour from Chicago (or two hours from DMCMW) I do quite a bit of traveling East and South, so the possibility of meeting somewhere isn't completely out of the question.
Feel free to ask questions and I can elaborate on anything as best as possible.
Chuck
I am doing a swap and of course have many parts available to someone that may need them.
A complete low mileage engine (21k) that was "running" (note the " ") when pulled. As of now I know for sure it needs the KJet rebuilt, otherwise I have spent quite a bit of time cleaning it up, and there are many new parts on it. If someone is needing a complete engine as a starting point for a restoration, this may be a good deal for you. I also have lots of brand new parts such as an accumulator, filter, stainless lines, new injectors, etc... That I could include if the price is right and they are needed. If not these parts will be available next.
It did have several broken bolts that were extracted and replaced with larger, and may possibly have had a minor puncture to the coolant jacket from a broken intake manifold bolt PO badly tried to repair (I really can't be sure) but this was recently professionally repaired and seems to have been corrected.
I'm putting a random starting price of $5k on it.
http://img.tapatalk.com/d/14/08/04/jujahuge.jpg
A complete manual gearbox, as well as "most" of the parts you would need if you are doing a auto/manual swap. (Minus pedal and clutch line) There appears to be an issue where the passenger side output is "sticking" I haven't had it opened to investigate, but expect that it will need some servicing. Again random price of $5k for that.
http://img.tapatalk.com/d/14/08/04/uzusy5u5.jpg
Items are located in N.W. Indiana about an hour from Chicago (or two hours from DMCMW) I do quite a bit of traveling East and South, so the possibility of meeting somewhere isn't completely out of the question.
Feel free to ask questions and I can elaborate on anything as best as possible.
Chuck