PDA

View Full Version : DIY EFI hardware kit



SEO Motorsports
08-13-2014, 09:03 AM
All,

I have slowly perfected the EFI system I have been installing on cars at the shop and want to offer the major hardware components to all the DIY guys out there. I will be offering the components to mount the injectors in the head, injector to CIS fuel line adapters, injectors clips, all new M8 banjo bolts with washers and fuel injector connectors. I will also be providing instructions on how to modify you fuel distributor to make it work, but a new SEO Billet aluminum unit is in the works. I am acquiring the equipment to make the 6 fuel injector lines in stainless and will also be offering that in the future. PM or email me for details. ed@seomotorsports.com 321-426-0061

The new stainless steel injector retainer is on its way back from the manufacturer along with all new stock replacement yellow zinc plated bolts I had manufactured. I am offering the banjo/hollow bolts with or without the EFI components for $2.50 each as I purchased a very large QTY to have in stock. I should have everything in stock by next week. I will post pictures of everything installed on the car I'm working on now.

30023

30024

SEO Motorsports
08-15-2014, 01:21 PM
The clips showed up and I installed all six with one injector adapter. Everything fit perfect and as planned. I'm just waiting on the new Banjo bolts to show up and I can install the fuel lines and get this thing running.

http://i40.photobucket.com/albums/e239/crazyedfsu/IMG_1360_zpsb86c9dd3.jpg (http://s40.photobucket.com/user/crazyedfsu/media/IMG_1360_zpsb86c9dd3.jpg.html)

http://i40.photobucket.com/albums/e239/crazyedfsu/IMG_1361_zpsabe6ea46.jpg (http://s40.photobucket.com/user/crazyedfsu/media/IMG_1361_zpsabe6ea46.jpg.html)

http://i40.photobucket.com/albums/e239/crazyedfsu/IMG_1362_zpsf837c8f8.jpg (http://s40.photobucket.com/user/crazyedfsu/media/IMG_1362_zpsf837c8f8.jpg.html)

Spittybug
08-15-2014, 06:29 PM
Looks good!

SEO Motorsports
08-15-2014, 06:40 PM
Thanks, it's an easy and clean setup for me to install. I'm sure others may find it simple to work with too.

SEO Motorsports
08-19-2014, 04:23 PM
I got the car put back together and it started on the first crank of the key so my base map seems to be good. No fuel leaks at all. I'll get pics and a video up tomorrow.

lazabby
08-19-2014, 05:17 PM
Looks good. I look forward to more pictures.

SEO Motorsports
08-20-2014, 02:49 PM
Ok here are a few pictures and one video of it running. this is still a rough tune and it was idling a little high because it was still cold. I'm waiting on a few parts to finish the turbo charge piping and then we can go and have some fun with it.

http://i40.photobucket.com/albums/e239/crazyedfsu/IMG_1364_zps4ef27cfb.jpg (http://s40.photobucket.com/user/crazyedfsu/media/IMG_1364_zps4ef27cfb.jpg.html)

http://i40.photobucket.com/albums/e239/crazyedfsu/IMG_1365_zpsa81d4e96.jpg (http://s40.photobucket.com/user/crazyedfsu/media/IMG_1365_zpsa81d4e96.jpg.html)

http://i40.photobucket.com/albums/e239/crazyedfsu/IMG_1366_zpsc022505b.jpg (http://s40.photobucket.com/user/crazyedfsu/media/IMG_1366_zpsc022505b.jpg.html)

http://vid40.photobucket.com/albums/e239/crazyedfsu/IMG_1367_zpsa3954ec0.mp4

http://s40.photobucket.com/user/crazyedfsu/media/IMG_1367_zpsa3954ec0.mp4.html

SEO Motorsports
09-02-2014, 08:20 PM
Follow up on the EFI kit. Everything is working great but the OEM fuel lines cracked and started to leak so we had to replace them with stainless units. I recommend to anyone doing any fuel system work EFI or K-Jet to highly consider replacing the lines with stainless. Whatever vendor you like, it does not matter, just do it. I was very gentle with these lines and they cracked and slowly got worse over a day.

DrJeff
09-08-2014, 09:27 AM
Follow up on the EFI kit. Everything is working great but the OEM fuel lines cracked and started to leak so we had to replace them with stainless units. I recommend to anyone doing any fuel system work EFI or K-Jet to highly consider replacing the lines with stainless. Whatever vendor you like, it does not matter, just do it. I was very gentle with these lines and they cracked and slowly got worse over a day.


I'm doing an EFI conversion and wish to re-route the fuel lines - take out the accumulator, reposition the fuel filter. Did you buy stainless steel fuel line tubing and bend it/flaring/fitting yourself? Any recommendations on a flaring tool?

Thanks
Jeff

Mark D
09-08-2014, 11:59 AM
Follow up on the EFI kit. Everything is working great but the OEM fuel lines cracked and started to leak so we had to replace them with stainless units. I recommend to anyone doing any fuel system work EFI or K-Jet to highly consider replacing the lines with stainless. Whatever vendor you like, it does not matter, just do it. I was very gentle with these lines and they cracked and slowly got worse over a day.

Thanks for sharing the warning! It's one of the first things I try to mention if someone asks me what parts to repalce first or potential issues to look out for.

Jeff K
09-08-2014, 12:29 PM
This is awesome. Please keep me in the loop on production.

I have an extra mixture unit from a junkyard from a B28F. I could try this.

SEO Motorsports
09-14-2014, 05:51 PM
I will do. I am not going to push to much on production units until I get more interest. At the moment I'm spending my time using what I have doing other EFI conversions.