PDA

View Full Version : PRV EFI inlet manifold for sale



chris williams
02-03-2015, 10:44 AM
Apologies if this is in the wrong section but as it's EFI specific then thought it best to place hear. I have an EFI manifold from a B29 Renault engine for sale. More of these conversions are done in the US than in the UK so thats why I have posted it hear. Unfortunatly shipping will be expensive but if any interest please PM me.
Thanks
Chris
327893279032791327923279332794

DCUK Martin
02-08-2015, 11:20 AM
Chris, this manifold can be bolted onto DeLorean heads but as you have shown in the last photo, the inlet ports have that extra notch for the injectors. This is echoed on the heads on its native engine, and is common to the Volvo B280.

The only EFI manifold with circular ports is from the Z7U 2.5 turbo engine.

chris williams
02-08-2015, 01:52 PM
Yes, your correct, infact realised my mistake in the above only after I could not edit it. Got it muddled up with a load of other engines/parts/clutter! Sale of parts is pending at the moment.
Chris

BABIS
02-09-2015, 03:52 AM
Chris, this manifold can be bolted onto DeLorean heads but as you have shown in the last photo, the inlet ports have that extra notch for the injectors. This is echoed on the heads on its native engine, and is common to the Volvo B280.

The only EFI manifold with circular ports is from the Z7U 2.5 turbo engine.

Hello Martin, I am pretty sure this manifold cannot be bolted on the delorean heads (and other k-jet heads or 2.5 turbo heads) because od the different width between these manifolds, right?

chris williams
02-09-2015, 03:02 PM
As far as I can see it's about 2cm to wide to fit a DeLorean stock engine B28E.
Chris