Vacuum Hose Diagram

[Nicholas R]

http://images.wikia.com/deloreantech/images/f/f6/VacuumRoutingDiagram.png

Here's vacuum hose routing in the engine.

[stevedmc]

Thanks. I'm going to use this today to double check some K-Jet stuff for a local owner.

[thirdmanj]

Don't we have one of these under the engine cover?

[DMCMW Dave]

Don't we have one of these under the engine cover?

Normally. DMC part 105241

http://store.delorean.com/p-6059-label-vac-pipe-route.aspx

[stevedmc]

Don't we have one of these under the engine cover?

Not on a time machine.

Btw, we checked vacuum and it's pulling 20 lbs at idle. I did notice there is no hose going from his distributor solenoid valve to the thermal control valve under the intake manifold.

For testing purposes I connected the distributor straight to his manifold tapping and it is still having start issues.

My guess is we will need to remove kjet at a minimum just to connect the hose to the thermal control valve.

I curious about the condition of his distributor cap. We will have tote move kjet to get to it too.

Here is a video of the vacuum.

http://www.youtube.com/watch?v=jgMZLmP1t1Y