UPDATED: SEDOC Fall Tech Session: Saturday Nov 14, 2015 [Archive] - DMCTalk Forum

DL4567

09-26-2015, 02:11 PM

Seems like we got it all straightened out in the planning thread, so we should make the date official now. (Hopefully this ridiculous Seattle weather will be gone by then)

We'll be descending toward Buford Valley, Georgia at approximately 10:00 a.m., on Saturday, October 10, 2015!

http://i.imgur.com/ahkXUCt.jpg

Working on your car isn't a requirement for attendance of course, so anyone who wants to come and just hang out, we'd lPlease give me some idea if you're coming, just post in this thread and I'll create an attendance list.
What do ya'll want for lunch? Pizza? Subs? (other)?
I'll PM the address to anyone who doesn't have it next week.

I'm really looking forward to seeing everyone. It's gonna be fun!

Freaky Beetle

09-26-2015, 07:06 PM

I will be there! Looking forward to it!

Ron

09-26-2015, 07:58 PM

Pencil in 2 + JimJam.

#D's to be decided.:wink:l

mr_maxime

09-27-2015, 11:17 PM

Will be there.

Also there seems to be an image I can't view under the bold part.

RammJaeger

09-30-2015, 10:44 AM

Will try to be there, pending my health issues are better by then.

Mike S

09-30-2015, 11:01 AM

Derek,

Count me in.

Thanks.

iflights

09-30-2015, 11:18 AM

I will be there as well. Sans car. Will be good to meet everyone.

RamblinDMC

09-30-2015, 04:15 PM

I may try to attend, depends on school though. :p My car won't be there sadly.

mr_maxime

09-30-2015, 08:01 PM

I'll bring my old radio just in case

Ron

09-30-2015, 11:08 PM

Torsion bar adjustment jig, AC evacuator, other tools needed?

mr_maxime

09-30-2015, 11:14 PM

Whatever's needed for angle drive replacement. i'll try to do it before the meetup but im not sure if ill be able to pull it off.

Ron

09-30-2015, 11:19 PM

Oddest thing for it is a 1-1/4" wrench iirc..and a bucket of patiece lol

DL4567

10-01-2015, 01:58 PM

This effing weather better be outta here by next weekend. Getting PRITTY tired of this *$#%&@.

Soundkillr

10-01-2015, 02:00 PM

This effing weather better be outta here by next weekend. Getting PRITTY tired of this *$#%&@.

Just remember, I called it! :)

DL4567

10-01-2015, 04:57 PM

I mean, seriously. Looks at this $h!t. I don't know how Seattle people do it.

http://i.imgur.com/pFZWdCM.jpg

Weather.com promises it'll clear up next week, and I believe them 100%! :8ball:

mr_maxime

10-01-2015, 07:27 PM

I cant even see that picture.

As for the angle drive, I bought a 1 1/4" wrench and it didnt fit. I used some calipers at work and it was about 32.01mm so I bought a 32mm wrench. If its too tight Ill just grind it to fit.

Ron

10-01-2015, 08:31 PM

It's been missing us....

Soundkillr

10-01-2015, 08:37 PM

Can deloreans float?

I mean, seriously. Looks at this $h!t. I don't know how Seattle people do it.

http://i.imgur.com/pFZWdCM.jpg

Weather.com promises it'll clear up next week, and I believe them 100%! :8ball:

DL4567

10-01-2015, 10:38 PM

Is everyone having trouble seeing my images? Also in the first post of the thread?

I noticed Google Images, which I use for hotlinking stuff, is a little "different" lately. Some changes have been made.

iflights

10-02-2015, 09:48 AM

Ron

10-02-2015, 10:42 AM

There was only a place holder there (both messages) until today. Fine now.

Soundkillr

10-02-2015, 10:51 AM

...fixed...

DL4567

10-03-2015, 02:14 PM

This damn internet keeps-a-changin'! Pisses me off, as I went to a lot of trouble to make that image and get the quote wording above it correct. Alright everyone, pretend you're seeing the beginning of this thread for the first time!

(Boring technical details, but I need to vent):
I was happily using Imageshack for hotlinking my forum post images for about 10 years. Then suddenly a couple years ago they decided to not be free anymore, so lots of people dumped them. Since then I've been using Google Photos, and it's been working great. Now some time this summer, suddenly they too have purposefully screwed things up. The image path to anything you upload is no longer a direct path to a jpg file. It's now a super-long string of gobbeldy gook, not ending in ".jpg", to make it impossible to use for hotlinking. No amount of right-clicking, inspect element, view source, etc.. will let you see where the file is located exactly. I tried it with Google Drive -- nope, then I also tried Microsoft One Drive in my hotmail account, -- nope! Same BS, a long string not ending in ".jpg." So what the hell happened? Is hotlinking images suddenly a CrAzY RiDiCuLoUs thing!?!?! Too expensive for large companies like Google and Microsoft to do? What's even worse, is that the now obfuscated links still make the images in my posts show just fine on my own computer, FOOLING me into thinking everything is fine and everyone else can see them too! :angry:

I created an Imgur account now, and transferred my recent pics to that. Big thanks to Soundkillr for editing the image paths!
We'll see how long the Imgur ride lasts, before things change again.

Now, let's all give the geniuses at Google a big round of applause for RUINING the first impression and fun of my beginning post!

Ron

10-03-2015, 02:55 PM

When they first started that crap, I started using my "free personal pages" space from my provider ;-)

mr_maxime

10-05-2015, 09:05 PM

I just had to get 3 stiches in my right ring finger. Hopefully itll be healed enough so I can shift to drive my delorean.

Dangermouse

10-06-2015, 09:00 AM

Just back after a few days away on a boat dodging hurricanes :wiggle:

Hopefully I'll be there, sans de lorean unfortunately, but looking forward to seeing old faces and new faces alike.

Freaky Beetle

10-06-2015, 10:35 AM

dodging hurricanes :wiggle:

+10 Points for a fantastic use of an emoji.

DL4567

10-07-2015, 04:36 PM

Well, as we alllll expected, the forecast is looking worse and worse for Saturday. Not cancelling at this point, as I know it constantly gets adjusted, but we should keep the possibility in mind. If it still looks like this by Friday, we might think about doing it on Oct 24th instead.

@^%*$%#! this world. Seriously. The most beautiful weather every weekday (go outside right now, it's paradise), but if you wanna do something special on a Saturday.....

http://i.imgur.com/I8HmI4h.jpg

http://i.imgur.com/m8MpCf3.jpg

Dangermouse

10-07-2015, 04:44 PM

How quickly can you build a 4 car extension to your garage?

DL4567

10-07-2015, 05:18 PM

Hehe, not fast enough I'm afraid. :)

That did get me thinking though, how many people are we expecting?

Here's the list I've quickly put together:

Freaky Beetle
Soundkillr
Dangermouse
Ron
Mike S
Mr Maxime
iflights
RamblinDMC (maybe)
RammJaeger (maybe)

Looks like we'll be 6+, or, too many to all park in the garage on a rainy day.

Dangermouse

10-07-2015, 05:46 PM

Well 1, 3, 4, 6, and 7 probably aren't bringing Ds. Their DDs can sit out in the rain. :)

mr_maxime

10-07-2015, 06:56 PM

I saw that weather at work earlier. Looks like it will mostly clear up after 4pm though...

Soundkillr

10-08-2015, 07:14 AM

Just a heads up, I'm out if it rains. This has me very frustrated as well. Seems like this happens every year. And I can't make the other day either.... :(

RamblinDMC

10-08-2015, 02:42 PM

Looks like I'll be able to make it. That is if it doesn't get rained out.

DL4567

10-08-2015, 06:25 PM

Well, we're at Thursday and the forecast still looks bad. I'd say cancelling looks likely at this point, but we shouldn't call it until Friday.
If Oct 24th is bad for a bunch of us, what about Nov 14 or 21?

It's October 2015. No hoverboards, and NO WEATHER SERVICE EITHER!!!! The scientists are twiddling their thumbs.

Freaky Beetle

10-09-2015, 10:50 AM

It looks like it is early morning rain at this point. We might be still good to go. For the record: I drove my car in the rain this morning and it didn't fall apart. ;)

Ron

10-09-2015, 02:24 PM

Not any more :-(
37214

Freaky Beetle

10-09-2015, 03:14 PM

Great....

Dangermouse

10-09-2015, 03:15 PM

I see a window between 3 and 4 :)

Soundkillr

10-09-2015, 05:11 PM

....well it's official. I'm out.

DL4567

10-09-2015, 06:58 PM

Well guys, I think the writing's on the wall. This is officially gonna have to be cancelled tomorrow. Which REALLY sucks, and I could rant and rant about how every day this week including today has been so nice, and Sunday will be too, but.... alas, it won't change the situation. SOOOOO frustrating.

Sure, our cars won't melt if they get wet, but it looks like it's gonna be a pretty rainy day overall, rather than just a quick shower here and there. And that's no fun to drive in, or even hang around a garage in. (especially when we've been spoiled by this beautiful weather all week!! --- sorry, sorry, trying not to get worked up about it)

I'm all for having it another day, if there's interest. I know Oct 24th is a problem for some, but I'm personally open to Oct 24th, Oct 31 (don't know if Halloween is a conflict during the day), Nov 14, and Nov 21.

Sorry guys, I'm as bummed as you are!

(could one of the mods please edit the thread title to include the cancellation? thanks)

http://i.imgur.com/QTYw3U7.jpg

http://i.imgur.com/lReENB6.jpg

RammJaeger

10-09-2015, 09:42 PM

Bummer. Well on my end maybe I'll feel better by the next date. I'm pretty open as long as my health continues to improve.

Dangermouse

10-10-2015, 01:37 PM

Looks at weather forecast.

Looks out of window

:(

1/10 for effort Weather Channel.

Dangermouse

10-10-2015, 02:52 PM

8(

Well that changed quickly didn't it !!

DL4567

10-10-2015, 02:53 PM

FWIW, the ground was wet here this morning, and it rained from approx 10:00-11:30. Then it started drying up around noon, but resumed medium rain at 2:00. Still raining now (almost 3:00).

But don't worry everyone, it's gonna be *PeRfeCt* weather every day starting tomorrow!!!! :rolleyes1:

http://i.imgur.com/BUREsv3.jpg

iflights

10-10-2015, 06:40 PM

DL4567

10-13-2015, 07:30 PM

Well, so far comments about Oct 31st, Nov 14th and 21st are..... nonexistent. Not sure if there's still interest for another attempt? November can be a little risky with temperatures, the day could be nice or a little chilly.

I know it's short notice, but what about this Saturday, Oct 17th? It just opened up for me. Forecast right now looks perfect.

Soundkillr

10-13-2015, 07:40 PM

I can't do this Friday, but don't let that stop anyone. I am open after that, and I'm fine with November. Cold doesn't bother me, but I HATE rain....

DL4567

10-13-2015, 07:42 PM

I can't do this Friday, but don't let that stop anyone. I am open after that, and I'm fine with November. Cold doesn't bother me, but I HATE rain....

Did you mean you can't do Saturday?

Soundkillr

10-13-2015, 07:53 PM

Did you mean you can't do Saturday?

Lol, yea, can't do Saturday. Or Friday for that matter....
:)

Ron

10-13-2015, 08:57 PM

Soundkillr

10-13-2015, 09:02 PM

Well, Ben, since you are open after that, remember that little ol' ding in my hood...;)
I'd like to pick it up/drop it off (if need be) at the meet WE ARE going to have...sometime?

I'm good any weekend (w/o rain).
Yea man, bring it by my house, as I HOPE to bring my car o the event, which means I couldn't get your Hood back to my house. Well easily anyway....

Dangermouse

10-13-2015, 10:29 PM

ccurzio

10-22-2015, 11:05 AM

Sorry I missed the original post but I'm glad I didn't miss a session. Count me in for the next one, provided my schedule can accommodate. :)

iflights

10-22-2015, 05:18 PM

I can join you guys on 10/31 if that's the date for the meetup.

Freaky Beetle

10-26-2015, 08:46 AM

I am not available on the 31st, but don't let that stop everyone else if that is a good date for the rest.

Dangermouse

10-29-2015, 12:57 PM

Knock, knock

I am assuming this isn't on, on Sat?

DL4567

10-29-2015, 10:20 PM

Hey everyone!

Sorry for my lack of communication lately. The last 2 weeks have been possibly the busiest 2 weeks of my entire life! :frantic: :smashfreak:
But things are settling down a bit now, and I'm checking in here more regularly again.

So yeah, about another get together... nah, nothing happening this Saturday the 31st, other than Halloween.
But I do have another date, let's do November 14th. That's 2 weeks and 2 days from now.

Hopefully:
a) it won't rain
b) it'll still be "nice" and in the 60s or 70s temps

Let me know who's in, and I'll probably start a fresh thread with the new date in the next couple days. Looking forward to it!

Ron

10-29-2015, 10:26 PM

I'm in.

mr_maxime

10-29-2015, 11:27 PM

Im in. Anyone change rear calipers and pads, and done brake flush before?

RamblinDMC

10-30-2015, 02:01 PM

I'll try to go. Maybe 2203 will be back on the road by then!

Ron

10-30-2015, 03:53 PM

Im in. Anyone change rear calipers and pads, and done brake flush before?Bring em! (There will probably be several people there to watch your back ;-)

Derek, can we get rotors turned locally if needed?

ccurzio

10-31-2015, 07:28 AM

Count me in as well. I can bring any tools anyone may need, and hopefully someone can possibly help me diagnose the weird noise in my car.

iflights

10-31-2015, 11:26 AM

Count me in for 11/14 sans car.

DL4567

10-31-2015, 01:38 PM

Derek, can we get rotors turned locally if needed?

I called a couple places, this one can do it on a Saturday in about an hour. It's 10 minutes / 5 miles from my house.

http://www.hensleyauto.com/

Ron

10-31-2015, 09:32 PM

:thumbup:

Bikercmbc

11-01-2015, 12:25 AM

Finally have a somewhat normal work schedule. Count me in right now, wont have my car though. possibly can bring some tools down if we know of certain jobs that will need to be completed.

Soundkillr

11-01-2015, 07:48 AM

Looks like I'm in...

mr_maxime

11-01-2015, 11:54 PM

Bring em! (There will probably be several people there to watch your back ;-)

Derek, can we get rotors turned locally if needed?

Alright, I was planning on having them done by a shop near my dad's house 11/7. Hopefully I can save myself on a couple hours worth of labor. I dont feel comfortable doing work on safety related parts just yet.

Freaky Beetle

11-02-2015, 08:12 AM

Looks like I should be in as well. I just recently rebuilt my entire brake system, so I can help with any of that.

Does anyone have any experience setting the air/fuel ration? I just installed the DMCH combo pump and a different fuel distributor, so now I am running really rich. I can manually dial it back, but I want it to be correct. I don't have a dwell meter, so I would appreciate if anyone can bring one with them.

Soundkillr

11-02-2015, 11:11 AM

Does anyone have the clubs torsion bar jig, and associated tools to do the drivers side? I am very seriously considering turning my drivers torsion bar DOWN. It probably just needs one click. It has way to much spring up. I have always slowed it with my hand, but yesterday my daughter opened the door (without permission) and it went springing up.
Anyone remember the process for this? I just remove the rear louvres and rear covering plate correct? If I have to do more labor than that, I may just leave it...

Dangermouse

11-02-2015, 11:33 AM

Soundkillr

11-02-2015, 11:45 AM

No idea where that jig is. I last saw it at Seans.

That's all the parts you need to take off.

You obviously need a suitably sized hex bit and an extension bar. And a volunteer to prop the door open.

I have no tools for this. If anyone has them, and 6 beers for me (so ill actually do the job without being scared to death) please bring them. I honestly think one click will do it. If there is adjustment in the hold plate, I could try that first....

Dangermouse

11-02-2015, 11:50 AM

No adjustment in hold plate.

Ron

11-02-2015, 01:59 PM

Does anyone have any experience setting the air/fuel ration?
...
I don't have a dwell meter, so I would appreciate if anyone can bring one with them.
I'll bring a dwell meter.

Does anyone have the clubs torsion bar jig, and associated tools to do the drivers side?
I'll bring the jig.

You obviously need a suitably sized hex bit and an extension bar. And a volunteer to prop the door open.I'll bring a good hex bit (if I can remember where I hid it ;-)
Derek has the rest iirc...

Freaky Beetle

11-02-2015, 02:05 PM

Ron to the rescue! As always. :)

I'll bring a dwell meter.

I'll bring the jig.

I'll bring a good hex bit (if I can remember where I hid it ;-)
Derek has the rest iirc...

DL4567

11-02-2015, 07:11 PM

Looks like everyone is excited about the day! :)

Also, it seems it's not getting overlooked, which is great, but I was thinking maybe the title of this thread could be updated with the new date? It seems making a new thread is unnecessary.

Soundkillr

11-02-2015, 07:25 PM

Ok I updated it, however I left all original posts and images unchanged. People should be smart enough to figure it out. Well, most everyone. I'll still bet money Ryan won't show up.

mr_maxime

11-02-2015, 08:29 PM

It should be Nov 14 not 11

DL4567

11-02-2015, 09:30 PM

Ok I updated it, however I left all original posts and images unchanged. People should be smart enough to figure it out. Well, most everyone. I'll still bet money Ryan won't show up.

Excellent, thanks! Yeah, I think everyone knows what happened with the old date, and has been following the thread since, so the old first post shouldn't mess anyone up. At the very least, Oct 10 has passed so no one can come that day by accident.

Ron

11-08-2015, 09:21 PM

Derek, I can't remember - Do you have a drill press we can use to remove a bolt from RamblinDMC's hub carrier?

mr_maxime

11-08-2015, 09:35 PM

Does anyone have mckanica seam sealer? And should I bring my jack and stands?

Ron

11-08-2015, 09:58 PM

There are several kinds...what do you need to do?

DL4567

11-08-2015, 10:30 PM

Derek, I can't remember - Do you have a drill press we can use to remove a bolt from RamblinDMC's hub carrier?

Yes, in my workshop there is a milling machine/drill press.

And should I bring my jack and stands?

I have a lift, so unless there are a bunch of car-raising jobs going on and you want to use the jacks and stands outside at the same time, I don't think bringing them will be necessary.

mr_maxime

11-08-2015, 11:09 PM

There are several kinds...what do you need to do?

I have a good suspicion that these are leaking

http://dmctalk.org/attachment.php?attachmentid=6053&d=1318850414

iflights

11-11-2015, 08:57 AM

Weather.com says we are going to have a sunny day on Saturday with 0% chance of rain. Hopefully like today thus far. It's been like Seattle or worse the last 6 days!

PM me the address and start time if we're still on.

DL4567

11-11-2015, 11:57 PM

I can't believe it. Weather's actually looking great Friday, Saturday, and Sunday. Sure, it won't quite be a nice 70-75 degrees, but I'll happily take almost 60 degrees and 100% sunny. We did it guys! The planned date is gonna work!

Start time is our usual 10am onwards. I will have coffee and donuts ready. :coffee:

davidrucker11387

11-12-2015, 06:21 PM

As of right now I am planning on attending!

David Rucker
DeLoDave, 6410

DL4567

11-12-2015, 09:12 PM

Awesome David, looking forward to seeing you.

I have cleared some space in my PM box, in case anyone needs to write me for the address.

Attendance list, based on a quick skimming through the posts just now:
Ron
Ben
Jai
David R
Mr Maxime
iflights/Steve
Kyle
Chris
Dermot
RamblinDMC (maybe)

Ron

11-12-2015, 10:27 PM

We are a party of 3 people and 2 Ds.

DL4567

11-12-2015, 11:19 PM

We are a party of 3 people and 2 Ds.

:ohcrap: Bwahahaha, after all the years of joking you never bring your D, you bring TWO!!

Ron

11-12-2015, 11:24 PM

:ohcrap: Bwahahaha, after all the years of joking you never bring your D, you bring TWO!!Ok..I deserve that.

Exactly why I am leaving with two this time.

Dangermouse

11-13-2015, 07:59 AM

A DD and 2 Ds aren't the same thing Ron. :)

ccurzio

11-13-2015, 08:47 AM

What, no Ryan?

Dangermouse

11-13-2015, 08:54 AM

Sean is bringing Ryan

sean

11-13-2015, 11:26 AM

Sean is bringing Ryan

I am, we've already organized carpools.

DL4567

11-13-2015, 11:33 AM

Sean, if you're even remotely thinking about attending, consider this a huge encouragement! It would be great to see you and catch up.

sean

11-13-2015, 11:36 AM

Sean, if you're even remotely thinking about attending, consider this a huge encouragement! It would be great to see you and catch up.

In all seriousness, I'd love to attend one again to catch up and get some grease under the nails but this is the first week of competition for us so I'll be spending my Saturday in a gym unaware of how awesome the weather is going to be. So...don't be surprised if I happen to drop in sometime in the future, it just cant be this weekend.:mad1:

ccurzio

11-13-2015, 11:45 AM

We miss you, Sean!

RamblinDMC

11-13-2015, 01:20 PM

I'll be there for sure! Really looking forward to it!

Ron

11-13-2015, 08:25 PM

...don't be surprised if I happen to drop in sometime in the future, it just cant be this weekend.:mad1::sad30:

Ron

11-13-2015, 08:33 PM

Tools:
Torsion Bar Jig
Hex Bits (Extra hard one MIA, but we'll be OK.)
Dwell Meter

Anything else?

mr_maxime

11-14-2015, 12:55 AM

If anyone has some old tailboard circuits that I could borrow until I upgrade mine id really appreciate it. One brake light doesn't work and the reverse don't.

Bikercmbc

11-14-2015, 02:43 AM

I'm a no go, was placed back on my old schedule and cannot make it down there. I'm trying for a different position and hopefully will have a mon-fri shift at the beginning of the new year.

ccurzio

11-14-2015, 08:27 AM

We're still on for 10AM, yes?

Soundkillr

11-14-2015, 08:32 AM

We're still on for 10AM, yes?

Yes.

DL4567

11-14-2015, 09:08 AM

Oh yeah, we are absolutely still on! :partyhat:

Side note: I had a surprise guest last night and wasn't able to go get the donuts. (Didn't want to buy them sooner otherwise they'd get too dry by this morning).
Can't go now as I need to get things ready here in the time that's left, so if anyone happens to be passing by a donut place and could pick some up, I would reeeeaaaaally appreciate it. No pressure though, please no one go far out of their way. I do have the coffee.

mr_maxime

11-14-2015, 09:18 AM

I am currently sitting in a donut shop and they are all out of donuts...

Ron

11-14-2015, 09:35 AM

Had to take care of a little emergency. On the way shortly...

mr_maxime

11-14-2015, 10:25 PM

It was fun meeting you guys. Thanks again for everyone who helped working on my car.

iflights

11-14-2015, 10:29 PM

I second that. It really was a great day. Great people and some great cars. Thank you for all your hospitality.

Freaky Beetle

11-14-2015, 10:50 PM

It was fun meeting you guys. Thanks again for everyone who helped working on my car.

How did the car do on the way back?

mr_maxime

11-15-2015, 08:01 AM

The wheels didn't fall off and with the way I normally brake I didn't notice much difference. When I slammed them though it definitely is much better.

Freaky Beetle

11-15-2015, 11:25 PM

Good news. We did have a great turnout! Seven DeLoreans and a great group of people. A big thanks to Chris for the pizza. Not sure who supplied the drinks, but thanks as well. Thanks to Derek as always for letting us set up shop at his house. Thanks to Ron for helping me sort out my air fuel ratio and teaching me how to use the dwell meter.

Dangermouse

11-16-2015, 09:41 AM

Great to see everyone again and meet some now guys and put faces to names

here's a couple of shots including my new-favorite frame plug

mr_maxime

11-17-2015, 09:31 AM

Hahaha the other plug fell off my car I'll try to figure out what it is

Soundkillr

11-17-2015, 09:45 AM

Hahaha the other plug fell off my car I'll try to figure out what it is

It's a black cut down spray paint cap. Pretty smart actually. I liked the way it looks...

mr_maxime

11-17-2015, 12:09 PM

Lol I know what that one is but I meant the one that fell off the other side. I don't think it was a spray can top.

Dangermouse

11-17-2015, 12:43 PM

well. post a pic.

mr_maxime

11-17-2015, 07:02 PM

Nothing special. Just a black cap

JIMJAM

11-17-2015, 08:36 PM

A quick picture of me riding the brakes behind Ron heading back up the mountain on the way back. I think he must have had his E brake on or something :hmm:

DL4567

11-17-2015, 08:39 PM

Ha! This is funny. Of all the parts to discuss, this one has been bugging me but I keep forgetting to ask about it. I noticed a few months ago that my passenger side one is missing, and even though it's somewhat easy to replicate, I checked DMCH's site first for the part. And I could never find it. Does anyone know what it's officially called?

Awesome turnout on Saturday by the way, big thanks to everyone who came, I really enjoyed the day!

mr_maxime

11-18-2015, 12:26 AM

Its part SP10397. (I think)

Ron

11-19-2015, 08:17 AM

A quick picture of me riding the brakes behind Ron heading back up the mountain on the way back. I think he must have had his E brake on or something :hmm:
Na, it's due to going around the curve with a true positive traction differential and not letting off the accelerator to compensate for the overwhelming power when it shifted to 3rd. Driver error.