View Full Version : Removing covers
Antileon
11-25-2015, 02:59 PM
Are there any challenges in removing the 2 plates covering the underside of the car. Is it required to remove , support or consider other parts, structures. ?
I wish to take care of some surface rust and rather than working under the car it would make sense to take them off and clean them properly.
Thanks
5707
If you're talking about parts #:106733 & #:106734 :
https://store.delorean.com/c-314-8-5-1-rear-bumperfasciadeflector-plates.aspx
Then, you only have 3 bolts to remove each of them.
Into the battery compartment and into the small luggage compartment behind the driver's seat.
Antileon
11-25-2015, 03:44 PM
If you're talking about parts #:106733 & #:106734 :
https://store.delorean.com/c-314-8-5-1-rear-bumperfasciadeflector-plates.aspx
Then, you only have 3 bolts to remove each of them.
Into the battery compartment and into the small luggage compartment behind the driver's seat.
I mean the 2 large triangular plates bolted to the underside of the chassis covering tank ect.
sorry for being unclear.
I think that the ones I posted above?
https://store.delorean.com/p-9738-air-defl-plate-lh.aspx
Antileon
11-25-2015, 04:53 PM
I think that the ones I posted above?
https://store.delorean.com/p-9738-air-defl-plate-lh.aspx
Its part 101716
The fuel tank plate:
https://store.delorean.com/c-305-8-1-0-frame.aspx
But that's only one plate.
You have to unbolt the 16 bolts to remove the plate, that's all.
sdg3205
11-26-2015, 01:27 AM
You get to find all the treasures dropped down there over the past 35 years. I found a dime from 1969. Yay.
Antileon
11-26-2015, 02:30 AM
You get to find all the treasures dropped down there over the past 35 years. I found a dime from 1969. Yay.
LOL, as long as I do not find rust, I am happy
Thanks from the cold Denmark
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.