Angle drive assistance requested

[mr_maxime]

I'll be in metro Atlanta this weekend and I was wondering if anybody could help me out changing my angle drive. I mostly just want some assistance with jacking the car properly. I'm only used lifts before and after seeing my neighbors car fall after his jack slipped I'm way more cautious especially with the Delorean's fiberglass body.

Otherwise I was planning on jacking the front frame using a 2x4 for protection then slipping cinder blocks under the body to keep it stable. I know that jack stands can damage the fiberglass.

[WHO1DMC]

There is a good video on YouTube. This helped me with mine. I had to destroy the original to get the retention ring holding the nut on. If you're good with pickes you don't have to do. But I did mine with 1 jack on car and 1 jack for wrench and being very careful.

Dave B.

[mr_maxime]

I already have the angle drive attached to a new nut. I've nearly changed it out before only to find out I lost the angle drive so I'm familiar with the procedure

[mr_maxime]

Assistance no longer required unless you know where my dad hid my speedo cable.