PDA

View Full Version : The Birth Of Delorean Cars Belfast 1981



bytes311
03-20-2018, 07:20 PM
Haven't seen this one posted. I wonder if any of the kids from the video own a DeLorean today.

https://www.youtube.com/watch?v=jIqLx7lNKR0

Col Bennett
03-20-2018, 07:53 PM
Thanks for sharing.

"Have you guys done this before". Classic stuff from John DeLorean.

A few observations on the pretty rough show car/early production prototype?


It's interesting to see the door piston/strut facing this direction…

http://content.colinbennett.com/dmc/2018-03-20_strut.jpg


The wheels look totally solid.

http://content.colinbennett.com/dmc/2018-03-20_wheels.jpg


The fascia color is very light. Production cars seem to be a lot darker.

http://content.colinbennett.com/dmc/2018-03-20_fascia.jpg


And check out that enormous handbrake to the right of the driver seat :shocked:

http://content.colinbennett.com/dmc/2018-03-20_handbrake.jpg

SamHill
03-20-2018, 08:34 PM
Although some have said that calling the first builds "Pilots" would be a misnomer, at 2:50 that's the term he uses himself.

Michael
03-20-2018, 08:58 PM
"Would you drive it fast when you grow up?"

"no"

How right he was.

Jonathan
03-21-2018, 08:16 AM
Thanks for sharing.

"Have you guys done this before". Classic stuff from John DeLorean.

A few observations on the pretty rough show car/early production prototype?



Yea, neat video, thanks for putting this up.

I also wondered about what that display car was all about? It looks closer to the production cars than the Proto1 version with the brown leather, but it still has some things you can see that weren't fine tuned yet.

No seatbelts that I can see in addition to the monster sized parking brake lever.

The rear (red) door light looks like it's not exactly where it would ultimately end up (looks like it is more on the bottom edge than the rear edge).

No HVAC vents coming from the corners of the dash into the doors.

And that's one heckuva lower engine cover spring/latch mechanism. Looks like the inside of a super-sized epipen or something.

OverlandMan
03-21-2018, 08:42 AM
No seatbelts that I can see in addition to the monster sized parking brake lever.


Not to mention the parking brake lever appears to be on the right side of the driver seat, unless my eyes are tricking me.

NJP548
03-21-2018, 09:01 AM
The wheels look totally solid.

Those are hub-caps made to look like the production wheels.

-Nick Pitello

DMC-81
03-21-2018, 09:28 AM
Very cool video. Thanks for sharing.
One other thing I noticed is that the toll booth windows don’t seem to be there yet, unless the tint was hiding them. Was it a solid piece or was it a slider?

dmcjohn
03-21-2018, 10:23 AM
Although JZD says that car was built in the factory.... it looks like the Visioneering car to me, going by the interior, the hubcaps, etc.

Dangermouse
03-21-2018, 10:36 AM
Although JZD says that car was built in the factory.... it looks like the Visioneering car to me, going by the interior, the hubcaps, etc.

+1 on the V-car

NJP548
03-21-2018, 12:26 PM
+1 on the V-car

+2

Classic salesman JZD in action.

-Nick

mburshtain
03-22-2018, 12:25 PM
What a nice video...
If you look at the door you can see it is missing the door seal lip which is part of the fiberglass body. (No setup for the inner door seal on those cars)

https://uploads.tapatalk-cdn.com/20180322/a8b8a26f4afdf660a3ef5c48f2bc3696.jpg
Sent from my iPhone using Tapatalk

AugustneverEnds
03-22-2018, 03:06 PM
Cool piece of footage