PDA

View Full Version : Spring cleaning 2018 parts for sale



Jonathan
05-01-2018, 02:48 PM
I have the following available for sale. Prices are in Canadian dollars and I'd prefer not to ship, i.e. meet in person like at the upcoming tech day this Sunday in Milton. I will have everything listed here with me on the weekend.

Cold/warm air intake 3-way valve (105952 x1) $30.00
Shield, splash (black) (111184 x1) $10.00
Heatshield, starter (NOS-original material) (101045 x1) $10.00
Coil wire (red) (106907 x1) $10.00
Dummy switches (used) (105610 x2) $5.00
Two hole lock plate (100919 x11) $1.00
Lower engine cover retaining strips, 486 mm (106388 x2) $10.00
Lower engine cover retaining strips, 145 mm (106392 x2) $10.00
Lower engine cover retaining strips, 145 mm, double edged (108465 x1) $10.00
Ashtray, trim around (short side) outside edge is cracked/missing (108748 x1) $30.00
Pull strap, black with ring (Not sure if leather or vinyl; came with car in 2007) (108658 x1) $15.00
Passenger arm rest cap (narrow, black) (W300002 x1) $10.00
Seat belt receptacle (driver), in mediocre shape (100701 x1) $10.00
Seat belt bezel (used) (106615 x2) $5.00
IKEA cupholders (x2, one black and one red) $2.00
Battery underpad, rubber (simple rectangular shape cut from gym equipment underpad material, 1/4" thick) (x17) $2.00
RUN DMC seat cover, new (x1) $20.00

Message me if interested in something and I will set it aside for you.

micmak
05-01-2018, 04:01 PM
I MIGHT be interested in one or more of the engine retaining strips. Also I'd like to see what one of those cup holders is like in reality. If you have them on Sunday, I'd like a peek.

......Mike......

Josh
05-01-2018, 04:24 PM
I can send you money for the dummy switches, and grab them next time i see you!

Jonathan
05-01-2018, 05:31 PM
I MIGHT be interested in one or more of the engine retaining strips. Also I'd like to see what one of those cup holders is like in reality. If you have them on Sunday, I'd like a peek.

......Mike......

No problem. They'll be there. I have a pile of those extra clips too if needed.

The strips I have are 2 A's, 2 E's and 1 F size according to my little cheat sheet I made years ago: http://dmctalk.org/showthread.php?6199-How-To-Locations-of-lower-engine-cover-retaining-strips

I have one of the Ikea cupholders in the car that I used and can show you how it works. I bought two extra at the time.


I can send you money for the dummy switches, and grab them next time i see you!

No sweat. They are yours. I can probably even leave them at the shop on Sunday in case you're back in there sooner than we meet up somewhere.

....

The prices are each, in case that wasn't implied. I didn't realize that when I attempted to copy paste over my spreadsheet data, I had written "each" in the header, but it didn't come with the items. I figured that was assumed considering I have 17 of the rubber battery underpads and they are $2 each and not all 17 of them for $2.

Trstno1
05-01-2018, 11:29 PM
What does the seat run DMC seat cover look like?

Jonathan
05-02-2018, 07:59 AM
What does the seat run DMC seat cover look like?

I bought two of these originally. They are gimmicky more so than seat covers you would actually want to use (IMO). Not that the material is awful, it just wouldn't be something I'd put in my car long term. I figured I would display them on the seats, but never did. I am going to keep the one and sell the other. It is back in the original box it came in as well.

Here's a couple pictures of one of them installed:

5621256213

Jonathan
07-24-2018, 08:33 AM
BUMP... these items are still available. Prices are in Canadian dollars.

(Item description, part number, quantity I have, price each)

Used items:

Cold/warm air intake 3-way valve (105952 x1) $30.00
Shield, splash (black) (111184 x1) $10.00
Dummy switches (105610 x2) $5.00
Two hole lock plate (100919 x11) $1.00
Lower engine cover retaining strips, 486 mm (106388 x2) $10.00
Lower engine cover retaining strips, 145 mm (106392 x2) $10.00
Ashtray, trim around (short side) outside edge is cracked/missing (108748 x1) $30.00
Pull strap, black with ring (Not sure if leather or vinyl; came with car in 2007) (108658 x1) $15.00
Passenger arm rest cap (narrow, black) (W300002 x1) $10.00
Seat belt receptacle (driver), in mediocre shape (100701 x1) $10.00
Seat belt bezel (106615 x2) $5.00

New items:

Heatshield, starter (NOS-original material) (101045 x1) $10.00
Coil wire (red) (106907 x1) $10.00
IKEA cupholder (x1, red) $2.00
Battery underpad, rubber (simple rectangular shape cut from gym equipment underpad material, 1/4" thick) (x16) $2.00
RUN DMC seat cover (x1) $20.00

Josh
07-24-2018, 10:16 AM
Dont sell the dummy switches! I can get them before or after DCS!

Jonathan
07-24-2018, 10:32 AM
Dont sell the dummy switches! I can get them before or after DCS!

Haha, no worries. I still have them. Are you planning on being in Ontario at some point this summer?

Josh
07-24-2018, 11:01 AM
Haha, no worries. I still have them. Are you planning on being in Ontario at some point this summer?

I will be driving back after DCS. So ill be in Hamilton on Aug 19th for a few days. We can meet up sometime, I can drive to you!

Rich_NYS
07-24-2018, 12:46 PM
I might be interested in the engine cover retaining strips. I need to check for the ones I'm missing & let you know.

Jonathan
07-24-2018, 06:41 PM
I will be driving back after DCS. So ill be in Hamilton on Aug 19th for a few days. We can meet up sometime, I can drive to you!

Sounds good. Would be great to meet up and catch up. Keep in touch closer to the date and we'll figure out where and when.


I might be interested in the engine cover retaining strips. I need to check for the ones I'm missing & let you know.

Lemme know Rich. Do you have a copy of my handy-dandy-idento-cheat sheet for those retaining grille strips? I made one a few years ago to help figure out which ones are which.

(Was meaning to tell you about a CD I found (new) in the clearance bin at Wal-Mart. Twisted Sister's Stay Hungry. That was the first album I ever owned, on tape cassette no doubt... and probably still have it in the basement somewhere. Thought a metal-head like you would get a laugh outta that one :) )

Rich_NYS
07-24-2018, 07:44 PM
Lemme know Rich. Do you have a copy of my handy-dandy-idento-cheat sheet for those retaining grille strips? I made one a few years ago to help figure out which ones are which.

(Was meaning to tell you about a CD I found (new) in the clearance bin at Wal-Mart. Twisted Sister's Stay Hungry. That was the first album I ever owned, on tape cassette no doubt... and probably still have it in the basement somewhere. Thought a metal-head like you would get a laugh outta that one :) )

I have the cheat sheet somewhere, I'll find time before DCS to figure out what I need.

That TS album is a good one! Dee Snider has actually released some new material recently and it's not bad IMHO:


https://www.youtube.com/watch?v=hljBz0zTEKQ