View Full Version : Frame & Body what glue for weatherstripping?
John U
05-28-2011, 03:23 PM
The weatherstripping on my hood is in great shape but it is now falling off. What glue do you recommend to re-attach it?
thanks
John
DMCMW Dave
05-28-2011, 03:38 PM
3M Super Weatherstrip Adhesive. Black hides better, yellow seems to stick slightly better.
AdmiralSenn
05-30-2011, 10:52 PM
What Dave said.
I just had some decent success reattaching my hood seal with painter's tape to mask off where I didn't want glue. A little gentle prying under the tape with a putty knife after the glue set and it's all nice and clean.
sdg3205
05-31-2011, 11:51 AM
Can the 3M adhesive be used to reattach the carpet on the bottom side of the hood? If not, is there a better alternative?
dmc6960
05-31-2011, 11:59 AM
Can the 3M adhesive be used to reattach the carpet on the bottom side of the hood? If not, is there a better alternative?
Use a spray adheasive for that. 3M 90. Put a light coat on both the hood and the carpet, then stick. Mask the hood for overspray.
Jim Reeve
DMC6960
nullset
06-02-2011, 03:15 PM
Should this stuff be used to seal the electrical box under the T-panel as well?
--buddy
Should this stuff be used to seal the electrical box under the T-panel as well?
--buddy
Use RTV for that.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.