Special T Auto Oil Pressure Gauge Sender

[rundmc]

Easy to install. Worked like a charm. A little shorter than the previous model the PO had on the car, so you may need a hair extra length of wire to run to it. I simply had to reroute my existing wire - only took a few seconds to do so.

[Jimmyvonviggle]

I got one too and am happy with it.

[vwdmc16]

I also just installed one but its much longer than the stock one was, still I think it works better than the the old original one did.

[Trstno1]

I purchased one of Hervey's pressure sender units for the gauge. It lasted about 4 months before going out :jawdrop:

Hopefully I just found the bad one in the lot.....

[WelmoedJ]

I purchased one of Hervey's pressure sender units for the gauge. It lasted about 4 months before going out :jawdrop:

Hopefully I just found the bad one in the lot.....

Indeed you may have gotten a bad one from the "nest".
Mine is on the car since 2008 and still good.

[Patrick C]

It is a Corvette part that happens to work in the DeLorean. You just need to make sure you get the 80 psi version.

You can buy them for less than $10 on RockAuto:

http://www.rockauto.com/en/moreinfo.php?pk=4589424&cc=1041208&jsn=13