PDA

View Full Version : Build your own Door Lock ECU



Bitsyncmaster
12-26-2011, 02:06 PM
I've been running this for years now. It was posted on the old .com site.

Farrar
05-15-2012, 03:37 PM
Dave,

Any chance this could be modified to accept a momentary negative pulse from a remote keyless entry module?

Bitsyncmaster
05-15-2012, 07:18 PM
Dave,

Any chance this could be modified to accept a momentary negative pulse from a remote keyless entry module?

I think it will work that way with all the door lock units. Just connect it to the door switch terminal. That is assuming your negative pulse can drive the 12 volt signal to ground (open collector driver).