Cup Holder Options?

[DeloreanJoshQ]

I know this subject was beat to death in DMCTalk's previous life but what are the best options and locations for our cars?

Would any of you please share the type, where to get it, and pictures of the install?

I was also trying to find a spot to make it integrate with the stock console but haven't found a good spot yet...

Thanks!

Josh Q

[fnzen]

Im still trying to find out who did the holder in the coin tray area from the old talk .com it did not come from DMCCA cause they thought it was pretty cool too

Proto where are you at with your "prototype" holder?

[sdg3205]

I picked up a couple of these. I inserted the very flexible metal strips under the center console plate around the shifter. No drill holes or adhesive residue.

So far so good!

"Type S" (http://www.canadiantire.ca/AST/browse/4/Auto/VehicleAccessories/InteriorCarGadgets/PRD~0375344P/Extra%252BLarge%252BCup%252BHolder.jsp?locale=en)

[fnzen]

750 mililiter bottle ? damn you dricking jack in there? :p

[sdg3205]

750 mililiter bottle ? damn you dricking jack in there? :p

750 ml x2!

I've installed a series of funnels and catheters to drain out under the car.

[NVAPILOT]

Dave, don't forget the IV bag along with your funnels and catheters. I put these on my Honda Goldwing and was able to travel 1000 miles without stopping. Beats depends.

Dave
2230 - washington dc, soon to be Reno Nv

[Jim]

Here is what I came up with. I painted it the same color as the fascia.

Jim

[SamHill]

Stage 0 Cupholder.

1565

[stevedmc]

Stage 0 Cupholder.

1565

Has it held any Diet Cheerwine lately?

[Patrick C]

Here is what I came up with. I painted it the same color as the fascia.

Jim

I like it!

[SamHill]

Has it held any Diet Cheerwine lately?

Bill offered, but I felt that he had done enough for me already, and declined to take it. If we're all ever in NC, we can get some Cheerwine Floats from that fast food place...

[Ryan King]

Here is what I came up with. I painted it the same color as the fascia.

Jim

Did you build that one yourself?

[kenny]

Here's mine,
This holds two 500ml coke bottles fine which is the standard size in Ireland. Its made from polished 304SS (1.5mm) and held on with velcro if I need to get to the coin tray.

[DeloreanJoshQ]

Here is what I came up with. I painted it the same color as the fascia.

Jim

Will it hold regular pop cans, bottles, and any fastfood cups?
How did you make it?
Looks great!

[opethmike]

Here's mine,
This holds two 500ml coke bottles fine which is the standard size in Ireland. Its made from polished 304SS (1.5mm) and held on with velcro if I need to get to the coin tray.

I want one!!!!

[DeloreanJoshQ]

Below is an idea of what I have in mind that would go into the passenger kneepad close to the center console. However, the coin tray isn't necessary.
I like the idea that it pops out when needed and also should match with the rest of the interior with the black trim.
To pull it off I would have to find a way to attach it firmly to the back of the kneepad....
I realize alot of people would not do this option, but if I think it could pass as a stock option I will try it...my wife and I are tired of spilling drinks!

http://i.ebayimg.com/00/$(KGrHqN,!l0E2EQw6qMgBNjBZLz2gw~~_12.JPG

http://cgi.ebay.com/ebaymotors/IN-DASH-CUP-COIN-HOLDER-ANY-STANDARD-DIN-OPENING-SIZE-/380351570449?pt=Motors_Car_Truck_Parts_Accessories&hash=item588eb86211

[MartyP]

This is what I have. Not in the way, doesn't stand out, and doesnt affect the look of the car. And not expensive !

One on each side.

Just great

[Jonathan]

Here's what I've got. Originally from Dave and Julee in about 2007 or 2008. I think at the time you could have got them from www.drinkholders.com but I'm pretty sure that doesn't exist anymore. Not sure where you'd find them now.

They work pretty well and more or less are out of the way, yet right where you need them when you go to reach for your drink (as I think the coin tray ideas are difficult to always be reaching backwards). They are a bit in the way for the knee of the passenger... but hey, so what, I don't sit in that seat ;)

I'm happy with them and the only thing that would make me less than 100% happy with them is that they don't seem to grab on to the bracket underneath the console cover plate very well and are noticeably loose. I've never had it dump over, but I woudn't want to test that theory too much.

23922393

[qwerk]

They are a bit in the way for the knee of the passenger... but hey, so what, I don't sit in that seat ;)

The good news is that if you're lucky, by the time they get comfortable with that flux capacitor in the footwell, they won't even notice the cup holders are in the way ;)

[Ashyukun]

My RX-7 convertible has the same holder as MartyP has screwed into the driver's side door panel- it has worked quite well and will even (though it's pushing it...) hold a Sonic Route-44 cup.

I have a plastic cup holder/coin tray with two cup spots (cup-coin-cup) that wedges between the passenger seat and the center console. Isn't very useful when I have a passenger in the car, but when I'm driving it by myself (most of the time at the moment) it works pretty well. I think I got it at Big Lots for like $5- it's pretty similar to this from Autozone (http://www.autozone.com/autozone/accessories/TSI-Products-Wedgie-cup-holder/_/N-25cz?counter=3&filterByKeyWord=cup+holder&fromString=search&itemIdentifier=363863_0_0_).

When I have a passenger in the car- they get to be my cup holder. :P

[Ryan King]

My RX-7 convertible has the same holder as MartyP has screwed into the driver's side door panel- it has worked quite well and will even (though it's pushing it...) hold a Sonic Route-44 cup.

I have a plastic cup holder/coin tray with two cup spots (cup-coin-cup) that wedges between the passenger seat and the center console. Isn't very useful when I have a passenger in the car, but when I'm driving it by myself (most of the time at the moment) it works pretty well. I think I got it at Big Lots for like $5- it's pretty similar to this from Autozone (http://www.autozone.com/autozone/accessories/TSI-Products-Wedgie-cup-holder/_/N-25cz?counter=3&filterByKeyWord=cup+holder&fromString=search&itemIdentifier=363863_0_0_).

When I have a passenger in the car- they get to be my cup holder. :P

Hahaha, I laughed because I use the same thing and feel the same way. I hardly ever drink anything in my DeLorean with the thought of spilling things inside my car. If I ever do, I buy a screw cap type drink so I don't spill. But if I can't avoid that, I do use the wedge type 2 cup holder unit on the link and I love it. It also fits in the storage compartment when I don't use it.

[Ozzie]

Here ya go, simple, cheap, and effective...

http://thereifixedit.files.wordpress.com/2011/07/white-trash-repairs-quicky-sticky-cup-holder.jpg

(Some real gems at that site.)

[GS450-Junkie]

There was a thread on the old forum that talked about this...the nicest one I saw looked like the custom SS piece near the coin tray, but it was all upholestered....looked awesome. Who was that ??

[stevie67cars]

These are a couple of pics of mine- is this the one you are thinking of?

http://i151.photobucket.com/albums/s136/stevie67cars/DSC00453.jpg

http://i151.photobucket.com/albums/s136/stevie67cars/DSC00452.jpg

Stephen

[DeloreanJoshQ]

These are a couple of pics of mine- is this the one you are thinking of?

http://i151.photobucket.com/albums/s136/stevie67cars/DSC00453.jpg

http://i151.photobucket.com/albums/s136/stevie67cars/DSC00452.jpg

Stephen

Did you make any more?

[Nicholas R]

Wow, ^That, could easily make some money. Just saying. I know I'd buy one (in black)

[protodelorean]

Im still trying to find out who did the holder in the coin tray area from the old talk .com it did not come from DMCCA cause they thought it was pretty cool too

Proto where are you at with your "prototype" holder?

Ummmm, errrrr, ahhhh, welll.:blush:

I've got a great prototype. Will mount same as original tray (just two screws), removable cup inserts (easy cleanup for spills) etc. etc. But right now, the prototype is smooth. I wanted to be able to cast it with the vinyl grain so that all it would need is to be dyed black or grey and would match the console. Haven't found a good way to get the grain on it though. Casting it smooth, then wrapping it in vinyl would be a pain so I haven't cast the mold. Open to suggestions.

[ssdelorean]

The easiest and cheapest way to make cup holders in the D is to use the stock cup holders that came with the car - that everyone has.

The space between the seat back and the pontoon near where the seat belt bolts to. It easily holds one or two 20oz screw on cap bottles. It can also hold the drive thru cups as long as you don't get the "super suck" size. Normal aluminum cans fit as well but are not tight so they may spill.

[protodelorean]

Made some progress on the cup holder mold today. Best of all, I think I resolved by texture issue. Stay tuned.

[GS450-Junkie]

well ?

[tyb323]

The easiest and cheapest way to make cup holders in the D is to use the stock cup holders that came with the car - that everyone has.

The space between the seat back and the pontoon near where the seat belt bolts to. It easily holds one or two 20oz screw on cap bottles. It can also hold the drive thru cups as long as you don't get the "super suck" size. Normal aluminum cans fit as well but are not tight so they may spill.

I thought I was the only one who knew about this!

[Dracula]

I'll be standing by with money ready.

[micmak]

Stage 0 Cupholder.

1565

Hi Sam, Sorry to change the subject Guys, but are those cloth seats in your D? Are they reupholstered or are they just covered with seat covers? Can you tell me about your seats, please and if you have any pics of them, I would love to see them.

Thanks.

......Mike......

[protodelorean]

Mold plug is complete. Waxing it tonight. Lay up the mold this week. (baby steps)

[aludden]

If all you drink is coffee (like I do) then I found these great Thermos brand cups that fit snugly and perfectly on either side. No mods required.
64866487
(yes, I'm working on my console)

[protodelorean]

Mold is in gel coat and first layer of fiberglass.6786

[SamHill]

Hi Sam, Sorry to change the subject Guys, but are those cloth seats in your D? Are they reupholstered or are they just covered with seat covers? Can you tell me about your seats, please and if you have any pics of them, I would love to see them.

Thanks.

......Mike......

Mike, I searched Ebay for seat covers that were similar to stock. They are made of the highest quality Chinese pleather for $10/set.

Oh, by the way, standing by to buy a cupholder if they become available!

[jawn101]

Mold is in gel coat and first layer of fiberglass.6786

Cash in hand... :)

[protodelorean]

Mold finished tonight! Should pull first part this weekend!
7102

[jawn101]

Mold finished tonight! Should pull first part this weekend!
7102

OK, call me what you like, but I'm...confused by that mold. :)

[protodelorean]

OK, call me what you like, but I'm...confused by that mold. :)

Yeah, it'll make sense when you see the part. I don't usually show molds, but this dang thing has taken so long I wanted to at least show you guys I was making progress.

[jawn101]

Yeah, it'll make sense when you see the part. I don't usually show molds, but this dang thing has taken so long I wanted to at least show you guys I was making progress.

Lol, OK. I can't wait to see what you come up with!! :)

[john 05141]

As a European who lived in the US for 2 years... I think this is very funny. Only Americans worry about something to put in something to drink in their car while driving:thumbup:. Do not get me wrong I admire the way Americans think and how practical they are. I took the habbit with me and I also drink my morning coffee in the car daily while driving to work here in Belgium.
I seldom drink in my Delorean. Only when the trip exceeds an hour one way. But I bought a cup holder at Pep boys last year while in the US for my work. It jams under the glove box lid and works fine.

But this thread was a hit on the old forum and now it is again... funny!!
Honestly... If something neat comes up, I'm interested!

John

[GS450-Junkie]

Put down your Christmas shopping lists for now and get back to that mold ! :mechbull:

[protodelorean]

Put down your Christmas shopping lists for now and get back to that mold ! :mechbull:

Ha ha! I'm waiting for the mold release to dry now to lay-up the first part tonight or tomorrow morning.

[jawn101]

Ha ha! I'm waiting for the mold release to dry now to lay-up the first part tonight or tomorrow morning.

Get to it, man! How are we supposed to drive around with hot toddys and egg nog unless you finish this thing? Don't you realize that some things are just *less important* than cup holders? :)

Edit: non-alcoholic ones, of course....

[protodelorean]

Get to it, man! How are we supposed to drive around with hot toddys and egg nog unless you finish this thing? Don't you realize that some things are just *less important* than cup holders? :) :cheers1:

I know. I'm slow. (For such a small mold, it's actually been quite a pain in the butt.) May not be saying much, but I do think I'm still on track for delivering faster than DMCH's stuff though.:woot: ...and I'm not sittin' on anybody's deposit money.

Once I pull the first one, I will be looking for someone local with a (stock interior) D to do a test fit and make some final bracket measurements. (Bernie M. used to be my go-to guy for this step, but sadly he's no longer around.)

[protodelorean]

Part #1 in the mold

7226

[DeloreanJoshQ]

I just purchased this on Ebay:

http://i.ebayimg.com/t/SAAB-9-5-REAR-CONSOLE-ARM-REST-CUP-HOLDERS-1999-00-01-/00/$(KGrHqIOKpEE3uB2rhcYBN8!CEl3R!~~_3.JPG

http://i.ebayimg.com/t/SAAB-9-5-REAR-CONSOLE-ARM-REST-CUP-HOLDERS-1999-00-01-/00/$(KGrHqEOKjsE2)lj5cONBNu1N86UpQ~~_3.JPG

It is out of a 2000 Saab 9-5 for $25. My plan is to integrate it into or below the passenger side kneepad close to the center console. The goal is to make it look like it could have came from DMC...we'll see...I'll share pics if anyone is interested....

[Tillsy]

I just purchased this on Ebay... It is out of a 2000 Saab 9-5
That's killer mate, look forward to seeing you integrate it!

[john 05141]

I saw this in a 1 drink version. I saw a picture once of someone put it in the middle of the passenger kneepad, I do not want to do that. Certainly interested to see your solution. I hope you will not cut up your kneepad for this.

John

[living_the_dream]

any update proto?

[DeloreanJoshQ]

Alright, so here is what I came up with using the above retractable cupholder I bought on ebay. I did not cut up the passenger kneepad; I couldn't find a shallow enough cup holder assembly that would clear the glove box tub anyway. This one fits directly under the passenger kneepad. I took some metal strapping and made a bracket with it, integrated it into the cupholder assembly and bolted it underneath the kneepad.
Result: It works great!! Wife loves it (should help her joining me in events and trips), it clears legs with no problem, is reachable by the driver, and it so far has held every size drink I have tested with no problems; still holds tight. This was the closest I could find that would blend in with the rest of the interior and be out of sight when not in use.....
Let me know what you think.

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/554047_10151460900835696_671145695_23562464_144014 3378_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/542895_10151460902835696_671145695_23562476_177977 9332_n.jpg

[Jimmycxc]

Nice. I like it!

[1batt4u]

Really nice!!!

Do they have single units??

[protodelorean]

any update proto?

Still working on it. I didn't like the way the fiberglass was working out so I'm working on a new molding approach. Should be pretty cool.

[DeloreanJoshQ]

Really nice!!!

Do they have single units??

Search for "cup holder" on www.ebay.com through the dozens of pages like I did.

I believe I saw several single cup holders on there...I belive from Volvo, BMW, Saab, etc.

Happy digging and post up you pics!!

[sean]

And the "Nices" have it! Great job.

[DeloreanJoshQ]

And the "Nices" have it! Great job.

Thanks! I drove my car again today and I used the cup holder...so much easier and more inviting to drive!!

I'll be sure to share my next project with you all very, very soon (nothing new, but I would like to do a how-to write up on it) as it re-lates to making our cars more fun to drive!!

Josh Q

[lazabby]

Here's what I've got. Originally from Dave and Julee in about 2007 or 2008. I think at the time you could have got them from www.drinkholders.com but I'm pretty sure that doesn't exist anymore. Not sure where you'd find them now.

They work pretty well and more or less are out of the way, yet right where you need them when you go to reach for your drink (as I think the coin tray ideas are difficult to always be reaching backwards). They are a bit in the way for the knee of the passenger... but hey, so what, I don't sit in that seat ;)

I'm happy with them and the only thing that would make me less than 100% happy with them is that they don't seem to grab on to the bracket underneath the console cover plate very well and are noticeably loose. I've never had it dump over, but I woudn't want to test that theory too much.

23922393

This is what I have in my car and it was in the car when I got it. My car was the raffle car from 2004 so maybe Dave and Julee donated it. (If so thanks, guys). Try googling "marine cup holders" and I think you can find them.

[Jonathan]

The good news is that if you're lucky, by the time they get comfortable with that flux capacitor in the footwell, they won't even notice the cup holders are in the way ;)

Haha, just saw this now. Nice guy. Ya, most of the time I'm driving it on my own, so the passenger seat is for accessories. Ya know, Flux Capacitor, JVC camcorder, etc. :)

[DMCMW Dave]

This is what I have in my car and it was in the car when I got it. My car was the raffle car from 2004 so maybe Dave and Julee donated it. (If so thanks, guys). Try googling "marine cup holders" and I think you can find them.

I think that was actually donated to Ken by the guy who made it at the time (way before we were in business). IIRC there were "business issues" with him and it went away a few years later.

[lazabby]

I think that was actually donated to Ken by the guy who made it at the time (way before we were in business). IIRC there were "business issues" with him and it went away a few years later.

Hmmm. That means I have a rare, hard to find item! Might be worth something.:elmo1:

[mluder]

Just ran accross these... Too spendy for me but cool nonetheless.

99709971997299739974

http://www.santanainteriors.com/products/billet/

EDIT - There's also this one for half the cost.

http://www.autoloc.com/catalog/Interior-Accessories/Cup-Holder/BWCH/Custom-Cup-Holder


Cheers
Steve

[mluder]

I have solved the cup holder issue. I can't believe no one has thought of this. The biggest benefit is you can move it from vehicle to vehicle and it requires no modification to integrate.

10224

Cheers.
Steve

[Tillsy]

I have solved the cup holder issue. I can't believe no one has thought of this. The biggest benefit is you can move it from vehicle to vehicle and it requires no modification to integrate.
10224

I like the way the tube redundantly routes to both cup holders to give double the capacity - but the flaw is if you only have one drink there's no inbuilt counter balance so would cause neck pain. Less of a hazard for the passenger though - perhaps they could wear it and the hose extend over to the driver?

Then again how many DeLoreans go out in the rain - perhaps the washer fluid could be replaced and rerouted, thus delivered on tap and under pressure.

[jawn101]

I like the way the tube redundantly routes to both cup holders to give double the capacity - but the flaw is if you only have one drink there's no inbuilt counter balance so would cause neck pain. Less of a hazard for the passenger though - perhaps they could wear it and the hose extend over to the driver?

Then again how many DeLoreans go out in the rain - perhaps the washer fluid could be replaced and rerouted, thus delivered on tap and under pressure.

Oh. My. God. The washer tube is briefly inside the cabin. Imagine the possibilities. Reroute some a/c lines so the bottle is chilled and....

Boy would I get pulled over in a hurry.

[GS450-Junkie]

These are a couple of pics of mine- is this the one you are thinking of?

http://i151.photobucket.com/albums/s136/stevie67cars/DSC00453.jpg

http://i151.photobucket.com/albums/s136/stevie67cars/DSC00452.jpg

Stephen

Care to tell us the story on this beauty?

[Shep]

Just thought I'd bump this thread with my own cupholder solution. When you have a ridiculously loud exhaust, either you love the tune of it, or you change it until you do. There is no in between, nor is there any use for a radio. So I was googling around to see if I could find a DIN replacement for the radio that would function as a sort of drawer. In that search, I came across one that is a drawer on top and a cupholder on the bottom. Naturally I went with this option, and I just finished installing it yesterday.

Here it is with the cupholder out:
http://vin559.com/images/work_done/cupholder/resized/cupholder01_640.jpg
("Free Box" is the drawer)

With drinks in it:
http://vin559.com/images/work_done/cupholder/resized/cupholder02_640.jpg

How it looks from behind the passenger door (not that bad actually)
http://vin559.com/images/work_done/cupholder/resized/cupholder04_640.jpg

And in case you're wondering what that color cable is in the passenger footwell, it's a Craig radio cable extension I got from videobob, with masking tape denoting what wire does what. Considering how long it is, I could probably engineer something to have the radio in the glovebox that pops out when opened (think: plutonium gauge in BTTF), but I doubt I'll ever use it. At least it's an option though! :)

Side note: the unit I got is supposed to screw in, however the DMCH DIN faceplate has no screws, and instead is supposed to be used with those stereos that slide in. Thankfully I had leftover pieces from my HD Radio install in my daily driver which did screw in, so I took the bracket from that radio, drilled a couple holes in it, then screwed the cupholder directly to it. Then I took the outer trim (another leftover part) and put that on there. I had to drill a couple 1/2" holes in the DMCH DIN faceplate to access the screws, but it's extremely secure as it is now. I forgot to take pictures of that process unfortunately.

[Nicholas R]

It's definitely a usable setup but I doubt you're going to convince many people to pick cup holders over their radio. Do you never use a radio? Just curious because you said you had HD radio in your daily driver. I know I listen to music whenever I drive no matter what vehicle it is.

[Shep]

It's definitely a usable setup but I doubt you're going to convince many people to pick cup holders over their radio.When 1Batt4U finishes his double-din radio faceplate, you can get the best of both worlds. Until then, I wholeheartedly agree. I figured since it's a solution no one posted yet that I would post it.


Do you never use a radio? Just curious because you said you had HD radio in your daily driver. I know I listen to music whenever I drive no matter what vehicle it is.It's the damndest thing, in my daily driver, I crank the radio up every time I drive it and love listening to it. In my DeLorean, I've never listened to it and love driving without it. Yet when I went without the radio in my daily driver, I couldn't stand it. I'm not sure if the difference is the fact that it's a DeLorean, or that I wouldn't be able to hear the radio anyways, or what it is. I still can't figure it out :dunno:

[Tillsy]

It's the damndest thing, in my daily driver, I crank the radio up every time I drive it and love listening to it. In my DeLorean, I've never listened to it and love driving without it. Yet when I went without the radio in my daily driver, I couldn't stand it. I'm not sure if the difference is the fact that it's a DeLorean, or that I wouldn't be able to hear the radio anyways, or what it is. I still can't figure it out :dunno:

You're not alone - I religiously listen to the radio (or my kids CDs/DVDs) driving my V8, but in my DeLorean I enjoy just driving and listening to the car.

Only exception was when I drove from Adelaide to Sydney and back - I put music on from time to time, but would turn it off after a while to listen to the DeLorean again.

Hard to explain... I guess I'm driving the D to specifically drive and enjoy the D, so don't need music?

[mluder]

Yeah... I was just thinking about that today. When I drive my truck I almost always listen to the radio or iPod but when I'm in the DeLorean I almost never have a radio on.

Weird.

Cheers
Steven

[Nicholas R]

You guys are nuts! I have playlist after playlist dedicated to DeLorean driving! :D the DeLorean is where I really rock out! :rockon:

[kobachi]

So radio discussions aside, how did Steve's molded cupholders come out?

[Ryan S.]

Just want to share my ikea hack.
Picked one from ikea for about $1. It clip to the center console. And unclips easily. It comes in many different colors but no ss.
Black one matches well with my interior. It holds Starbucks coffee to big gulp cup. When I don't need it, just throw it behind back seat.

http://dmctalk.org/attachment.php?attachmentid=34877&stc=1http://dmctalk.org/attachment.php?attachmentid=34879&stc=1http://dmctalk.org/attachment.php?attachmentid=34880&stc=1

[mluder]

When I don't need it, just throw it behind back seat.

You have a back seat!?!?!
:rofl:

Seriously though... This is a pretty good hack.

Cheers
Steve

[16949]

I need a cup holder...What do I google for ikea hack?

[DMC-81]

I need a cup holder...What do I google for ikea hack?

Hi there,

It looks like the Ikea part number is 102.710.91


Cheers.

BTW, Cool idea Ryan.

[Mario]

Googled the product number on the bottom, looks like it's the BYGEL:
http://www.ikea.com/us/en/catalog/products/10271091/

[16949]

Hi there,

It looks like the Ikea part number is 102.710.91


Cheers.

BTW, Cool idea Ryan.

Thank you! I found on Ikea, I'll have 3 extras :D

[88KPH]

This is what I have. Not in the way, doesn't stand out, and doesnt affect the look of the car. And not expensive !

One on each side.

Just great

I like these, but is there any loom running through sills to screw up?

[mluder]

Thank you! I found on Ikea, I'll have 3 extras :D

OK... How did you get it to stay in place? The lip on the "cup holder" doesn't fit over the center console.

Cheers
Steven

[Jonathan]

OK... How did you get it to stay in place? The lip on the "cup holder" doesn't fit over the center console.

Cheers
Steven

I tried the IKEA cupholder hack the other day.

I found out what you meant, Steven, by describing the lip not fitting over the centre console. I got my heat gun out and eased that lip out a little bit. Not a lot, but enough to get it to at least point straight instead of angled in slightly, which is where they start.

When I went out to put it into the car, I found maybe it still wouldn't go, and then I looked closer at someone's picture of where they installed it and figured out where it was going to work on my car.

The angled lip on the inside edge of the console shift plate area is the problem. If you slide it back enough to be about even with the switches, that area is more straight and it tends to fit ok. Not too far back to where it meets up with the beginning of the elbow portion of the console, but just before that.

You'll see how that works once you try it. Picture here:

40759

[mr_maxime]

I got one of these http://www.oreillyauto.com/site/c/detail/CA00/91117/N0320.oap?ck=Search_N0320_-1_-1&pt=N0320&ppt=C0326

It noticed it one day when my friend was getting oil and it was only a dollar.

[Ryan King]

Just want to share my ikea hack.
Picked one from ikea for about $1. It clip to the center console. And unclips easily. It comes in many different colors but no ss.
Black one matches well with my interior. It holds Starbucks coffee to big gulp cup. When I don't need it, just throw it behind back seat.

http://dmctalk.org/attachment.php?attachmentid=34877&stc=1http://dmctalk.org/attachment.php?attachmentid=34879&stc=1http://dmctalk.org/attachment.php?attachmentid=34880&stc=1

Went online to buy a couple tonight and they don't offer it online!! GRRRRRRR!!!!
SO I checked eBay, and I can only get them in a group of 3 for 12.00 bucks. They are 0.99 in store.

Anyone on here making a trip to IKEA soon??? :)

[Jimmyvonviggle]

I remember when we were young we simply held our drinks between our legs. Simpler times back then. But if someone actually comes up with a good place for a cup holder they will make a fortune.

[Michael]

I don't know if it's been mentioned here yet (and I'm not reading through 9 pages of cup holder talk to find out) but my wife has one of these in her little convertible. Works fine and it's stable. Not much fun for the passenger though.

http://www.ebay.com/itm/Auto-Truck-Car-Can-Water-Bottle-Drink-2-Cup-Holder-Seat-Wedge-Universal-Mount-/182081215224?hash=item2a64e2daf8:g:ZzcAAOSwbwlXA1S 7&vxp=mtr

[durech]

I picked up a mini-console like this one (http://www.amazon.com/Hopkins-EMIC-BLA-Go-Gear-Console/dp/B000FGLQCK?ie=UTF8&*Version*=1&*entries*=0) at my local Walmart (can't find it on their website, however). It fits perfectly between the seats and in the slightly recessed area that the tray is in (so does not move). I don't have any CDs and just use that storage area for other stuff. Definitely holds more than the little tray (plus the tray is still accessible, if needed)

43427

[Tillsy]

Interesting - didn't realise I neglected to upload a picture of the cup holders I integrated into my custom centre console a few years back. Here it is...

http://dmctalk.org/attachment.php?attachmentid=43524&d=1465258313

[refugeefromcalif]

I got one of these http://www.oreillyauto.com/site/c/detail/CA00/91117/N0320.oap?ck=Search_N0320_-1_-1&pt=N0320&ppt=C0326

It noticed it one day when my friend was getting oil and it was only a dollar.
I remember buying those for my doors back in the early to middle 80's. I thought about them again when I bought my D but, with the way the doors open, I didn't want to get wet when I opened it...
Never thought about alternative places to hang it.

George

[16949]

Went online to buy a couple tonight and they don't offer it online!! GRRRRRRR!!!!
SO I checked eBay, and I can only get them in a group of 3 for 12.00 bucks. They are 0.99 in store.

Anyone on here making a trip to IKEA soon??? :)
I can send you a couple.. i found on Amazon, i don't need extras

[Ryan King]

I can send you a couple.. i found on Amazon, i don't need extras

I would appreciate that! Are they black? PM me if you'd like.

[16949]

I would appreciate that! Are they black? PM me if you'd like.


No, I think there's a white and another color. Are you going to DCS? I can bring them.

[Ryan King]

No, I think there's a white and another color. Are you going to DCS? I can bring them.

I am not. No. :[

I'm in Japan now, went to IKEA. they had the cups. But only in Red. Orange. And Green. :[

[Jonathan]

Anyone using the IKEA cupholders feel like they are a little too wide and let a slim bottle or can or coffee cup move around too freely? I put a coffee cup in mine and it's too wide to grab the sides of the cup. If I were to need to brake quickly or make a quick turn, it wouldn't stay still very well. It wouldn't dump right over, but it would slop out the opening depending on how full it was at the time. Anyone come up with something to fix that?

[aotmfilms]

Bought mine at Autozone. I don't have a picture but I have the same issue. Anything larger than a can of Coke and I can't have it. Then I have to remember to grab it before I open my door......

[16949]

Anyone using the IKEA cupholders feel like they are a little too wide and let a slim bottle or can or coffee cup move around too freely? I put a coffee cup in mine and it's too wide to grab the sides of the cup. If I were to need to brake quickly or make a quick turn, it wouldn't stay still very well. It wouldn't dump right over, but it would slop out the opening depending on how full it was at the time. Anyone come up with something to fix that?
They are not the optimal solution, imo, just a decent cheap and easy solution that doesnt permanently alter the car.

Sent from my SM-G928P using Tapatalk

[Jonathan]

They are not the optimal solution, imo, just a decent cheap and easy solution that doesnt permanently alter the car.

Sent from my SM-G928P using Tapatalk

Yep, lol. Completely agree with you. And the part about whoever comes up with an optimal solution could make a lot of money!!

I saw this cupholder gadget for sale that's meant for your bicycle handle bars. Now, who goes on a bike ride with a pop or coffee on their handle bars vs a water bottle in a bracket on the frame I don't know.

The opening is the perfect size for a medium coffee cup from the main coffee chain in this area. The catch is, it attaches on to a "bar" that would be going horizontal.

I'm trying to MacGuyver a solution to give me that bar and of late I was trying to find a combination of fittings or mounts from dashcams or home speakers or the like that would work. I don't want to drill into anything and make it permanent, but I don't want to wear the coffee if it slips and spills from using a clip or suction cup that stopped holding on tight.

This is it here: http://www.canadiantire.ca/en/pdp/everyday-traveler-bike-cupholder-0730028p.html#srp

[durech]

I still like the one I found at Walmart that fits perfectly on console between the seats (in the recessed area where the tray is-so it will not move). It holds all sizes of cups and travel mugs quite securely and requires no modifications and is easily removable. (https://www.amazon.com/Hopkins-EMIC-BLA-Go-Gear-Console/dp/B000FGLQCK?ie=UTF8&*Version*=1&*entries*=0). The picture make it look much bigger than it really is.

[protodelorean]

Finished one of my trimming jigs today and got the first trim phase done on the first batch of cup holders. Here's a shot of the prototype installed.48041

[kobachi]

Just take my money.

[DMC-81]

Finished one of my trimming jigs today and got the first trim phase done on the first batch of cup holders. Here's a shot of the prototype installed.48041

Wow! That looks really good! :thumbup:

[Michael]

Finished one of my trimming jigs today and got the first trim phase done on the first batch of cup holders. Here's a shot of the prototype installed.48041

Nice...you could sell those all day long.

[SamHill]

Need it.

[mr_maxime]

Looks nice but how easy is it to reach? I always thought that would be too awkward of a spot for a cup holder.

[Michael]

Looks nice but how easy is it to reach? I always thought that would be too awkward of a spot for a cup holder.

Better than between your legs

[steve]

I also would like 1

Steve

[Bob635]

Josh,

Not quite sure what you mean by "best options and locations"? You have done some great upgrade already to your car!

We have a lot of upgrades planned for the "Dream DeLorean". One I really like is the center console storage tray. The arm rest is hinged and you can open in to store stuff underneath.
You have to cut the cardboard out of the area of the console and attach hinge to the arm rest and the console. Then find a shallow plastic storage tray that fits in the hole you cut out.
The tray rests on the frame.

As for cub holders, which the D really needs today, this gets much more complicated. Here is what we have planned.

Remove the "key tray" at the end of the console. Widen the area. Custom 3D print 2 cup holders to fit down into this space and rest on the frame. Finish with black wrinkle paint (which really works well) to match grain in the car.

Window switches? Ryan and I like the brushed SS ones that illumination.

Of course, we have a lot of other technical upgrades planned. (e.g. K. Krimm's dashboard - bar screen-Great work K.K!)

Construction was supposed to start this month, but remodeling of parts of the LR for this years Chicago Midwest Delorean Picnic (August 19th) has taken precedence- since we plan
on a number of video presentations. (Already had this capability for the DeLorean Weekend in Las Vegas.) Work in the Dream Delorean is Now it is planned to start in April.

Bob

[blueshark66]

Finished one of my trimming jigs today and got the first trim phase done on the first batch of cup holders. Here's a shot of the prototype installed.48041

Yup, I'll buy one too!

[Jonathan]

Finished one of my trimming jigs today and got the first trim phase done on the first batch of cup holders. Here's a shot of the prototype installed.48041


Just take my money.


Wow! That looks really good! :thumbup:


Nice...you could sell those all day long.


Need it.


Yup, I'll buy one too!

Yes, yes, yes, yes, yes and yes!

One in black please. Name your price. :)

[Ras12]

Count me in for 2 units!i

[mluder]

I might be in for one in grey... Depending on price.

Cheers
Steven

[Lwanmtr]

Finished one of my trimming jigs today and got the first trim phase done on the first batch of cup holders. Here's a shot of the prototype installed.48041

Id be interested in something like this too...depending on how much it cost.

[rossmilstein]

Looks good. What size diameter are the cups and how deep? I'd like to experiment too. Thx. Ross


Sent from my iPhone using Tapatalk

[Bob635]

The "Dream DeLorean" will have a number of cup holders built into the new dashboard.

Bob

[movieman1026]

can I get in on this? how do I get in on this?

[Lwanmtr]

Only the shadow knows.....

[Max]

Looks great, I'd love one. Does it just sit atop of the coin tray? I'd be apprehensive about installing one permanently.

[SpudMurphy]

12 pages of posts on cup holders huh? - an emotive subject?

:-)

[Max]

12 pages of posts on cup holders huh? - an emotive subject?

:-)

Hah! I don't even own a car yet and I want a cup holder. How's that for priorities.. :8ball:


Edit: 13 pages!

[Lwanmtr]

12 pages of posts on cup holders huh? - an emotive subject?

:-)

Well, cupholders are rather important..without them we feel incomplete and have no place to put our drinks or hold our ipods. Though we could do what they did in Top Gear and duct tape the cup to the steering wheel...lol

[Shep]

Well, cupholders are rather important..without them we feel incomplete and have no place to put our drinks or hold our ipods. Though we could do what they did in Top Gear and duct tape the cup to the steering wheel...lolScrew iPods, I replaced my radio with a dual cupholder. Still rockin' that bad boy.

[Alpharaider47]

12 pages of posts on cup holders huh? - an emotive subject?

:-)

Cup holders are a subject near and dear to my heart. You don't know what you've got til it's gone!

Question about some of those cup holders I saw mounted below the door sill though- if you have a drink in there when you try to get out of the car, does that interfere with your ability to do so? Or is it something you can live with?

[Lwanmtr]

Just dont mount one to the door,,,,just sayin'

[dodint]

I buy my drinks in bottles and let them rest in the cubby hole at the rear of the console. My years of driving old BMWs has prepared me well for this.

That said, I don't drink coffee which might enable my behavior.

[Shep]

I don't drink coffee which might enable my behavior.Piqued my interest on that bit, can you clarify what you meant? I don't drink coffee either, just kinda threw me and don't want to assume anything.

I like your idea though, wonder if I can find a properly sized insulated bag with ice for it. The last parade I was in, the water was literally undrinkable from sitting in the sun and having about 120 F water to drink. Burn yourself to quench your thirst, or stay thirsty, only two options. (But again, my cupholder is where the radio used to be, and I was also dumb enough to leave the bottles in the car overnight, so by the time mid-day hit they were already burning up). That solves a lot for me :thumbup:

[dodint]

Coffee is generally served in a non-sealable container so you can't just close it and toss it wherever. In the BMWs I would use the door pocket or the crevice where the hand brake is. Not viable options in the DMC, though.

[Shep]

Coffee is generally served in a non-sealable container so you can't just close it and toss it wherever. In the BMWs I would use the door pocket or the crevice where the hand brake is. Not viable options in the DMC, though.Ooohhh, bottle vs. cup, gotcha. I'm with you now, I didn't see that before.

[Lwanmtr]

Ooohhh, bottle vs. cup, gotcha.

Let the fight begin! :yoda:

[Shep]

Let the fight begin! :yoda:

Just to complicate matters, a single-sided entrant:

https://i.pinimg.com/originals/b2/9f/30/b29f30ea5cc59b5580cfb53473660468.jpg

[johnyrottin]

protodelorean, do you still have any more of these available?

[Boxbot]

I've always thought fabricating a cup holder in the ashtray void would make sense. Is it not deep enough? Is it likely to be knocked over while shifting?

[Justin Trabue]

I fabricated this for my drinks and phone mount

60480

[Patrick C]

Here is mine, complete with a can of New Coke. The same cup holder used in high end German cars.

Available here:

https://www.ultimatecupholders.com/fischercupholder.html

[jawn101]

Here is mine, complete with a can of New Coke. The same cup holder used in high end German cars.

Available here:

https://www.ultimatecupholders.com/fischercupholder.html

New Coke? I'll have a Pepsi Free.

[Mark D]

New Coke? I'll have a Pepsi Free.

If you want a pepsi pal, you're gonna pay for it.

[Timeless]

If you want a pepsi pal, you're gonna pay for it.
"Look... just give me something without any sugar."

[SamHill]

I fabricated this for my drinks and phone mount

60480

I like your custom dash mat. But having to exert energy to slightly lean forward in order to retrieve a beverage seems un-American.

[Lwanmtr]

I fabricated this for my drinks and phone mount

60480

Must have long arms to be able to get to your drink from there...lol

[FABombjoy]

That's a perfect spot! Unless you have some T-rex in your family tree :D
https://i.imgur.com/NJkKM6Q.jpg

[Lwanmtr]

That's a perfect spot! Unless you have some T-rex in your family tree :D
https://i.imgur.com/NJkKM6Q.jpg

Not from the driver's position..lol

[jamesrguk]

I thought it would be hilarious to make a holder with a gimbal which hung from the door.

hmm, my wife's out tonight so I have some free time and a 3D printer...

perhaps not.

[Lwanmtr]

If it worked and wasnt in the way when youre driving that would be a neat idea.

[mluder]

I thought it would be hilarious to make a holder with a gimbal which hung from the door.

hmm, my wife's out tonight so I have some free time and a 3D printer...

perhaps not.

Already exists.. A saw a version somewhere that had a suction cup and gimbal... It was attached to the door window and worked perfectly. Might have been Facebook. I'll see if I can find it.

Cheers
Steve

[Lwanmtr]

I was thinking something less prone to pop like suction cups...maybe something that could attach to the panel....hmmm..now im gonna have to think about it....along with my vent baffle...and maybe a redesigned glove box insert

[mluder]

Now that Facebook appears to have fixed there photo issues...
60537
60538

Cheers
Steve

[Lwanmtr]

Thats pretty cool.

[jamesrguk]

Now that Facebook appears to have fixed there photo issues...
60537
60538

Cheers
Steve

Well found, quite a novel solution, I now need to come up with something more elaborate...

J

[Lwanmtr]

Wonder if those are available to buy?

[Justin Trabue]

I like your custom dash mat. But having to exert energy to slightly lean forward in order to retrieve a beverage seems un-American.

Thanks. The dash cover came from www.covercraft.com

[Bongiovi]

I work on boats and there are quite a few gimbaled cup holders for the marine market. Most are white but there are also black and stainless variants. These aren't suction cupped either and can be mounted to the door.

60944

https://tempress.com/store/Fish-On-%C2%AE-Cup-Holder-Rod-Mount-Black-p1527519

[Lwanmtr]

That looks like it would require drilling into the door, or wherever you plan to mount it.

[hippieman9]

That looks like it would require drilling into the door, or wherever you plan to mount it.

I am currently building a cupholder that retracts under the passenger knee pad. mounts to existing bolts under the dash, no damage to car is done. easy install and removal if need be.

[hippieman9]

here are a couple pics of what I am building. PM Me if interesting in purchasing. $120 plus shipping (includes the cupholder.)

60948
60949
60950

Holds two large coffees great, and plenty of leg room too!

[Bob635]

Move the window switches to the doors (the stock wiring is sufficient to do this). Then put a cup holders where the switches used to be.

That is how the Iron Man Delorean is being built.

Bob

[Lwanmtr]

Would be cool if there was a premade kit for that kind of mods

[dn010]

Move the window switches to the doors (the stock wiring is sufficient to do this). Then put a cup holders where the switches used to be.

That is how the Iron Man Delorean is being built.

Bob

The cups would make shifting difficult on the 5-speed.

[CFI]

The cups would make shifting difficult on the 5-speed.

Sounds like you need to convert to automatic. :rofl:

[Lwanmtr]

Sounds like you need to convert to automatic. :rofl:

See? Automatics do have an advantage...hehe

[DMC VIN 6639]

I bought the cup holder from amazon and cut off the bottom. The cup holder had sharp edges that dug into the center console, so it was no good. The cup holder and fire extinguisher bracket are screwed to a piece of plywood. The wood is sprayed with some truck bed liner to get some texture.

613206132161322


https://www.amazon.com/EEEKit-Storage-Organizer-Multifunction-Accessories/dp/B07D4F4MQL/ref=sr_1_27?keywords=cup+holder&qid=1569957440&s=gateway&sr=8-27

[Lwanmtr]

Nice work.

[Michael]

https://www.amazon.com/EEEKit-Storage-Organizer-Multifunction-Accessories/dp/B07D4F4MQL/ref=sr_1_27?keywords=cup+holder&qid=1569957440&s=gateway&sr=8-27
I had it all wrong. Untill I took the time to understand the instructions, I was jamming my drink in the phone slot.

61326

[DMC VIN 6639]

I had it all wrong. Untill I took the time to understand the instructions, I was jamming my drink in the phone slot.

61326


It's very complicated.

[tommyrich]

61346

[JBaker4981]

61346

Boy that looks familiar :approve:

[Carliannewman]

I generally only needed one cup holder. I don’t like the ones that you reach to reach back for, or that flip out etc. I donated the ashtray fitting. Got a thick plate of aluminum and fitted to the opening. Drilled a 3 inch hole and then bought the perfect poker table SS drop in cup holder off a poker website. Sanded it to a brushed finish. It holds a can or medium sized drinks. Enjoy

61397

[SamHill]

I generally only needed one cup holder. I don’t like the ones that you reach to reach back for, or that flip out etc. I donated the ashtray fitting. Got a thick plate of aluminum and fitted to the opening. Drilled a 3 inch hole and then bought the perfect poker table SS drop in cup holder off a poker website. Sanded it to a brushed finish. It holds a can or medium sized drinks. Enjoy

61397

Very elegant. Hey, DeloreanGo, are you reading this?

It is funny how society has progressed. As a kid of the 70s and 80s it seemed designers made sure each passenger had access to a damn ashtray.

[megamanex]

I've designed a fully modular, interchangable cupholder system that allows for 2 "coke" can sizes, a big gulp size, iphone holder, and generalized storage that all uses factory mounting and looks perfectly in the design conceit of the original car.

I'm hoping that DMC lets me know if they want to go with it or no, otherwise I'll show you all the setup soonish.

It doesn't interfere with shifting or anything aesthetically and matches pretty darn flawlessly.

[Michael]

I generally only needed one cup holder. I don’t like the ones that you reach to reach back for, or that flip out etc. I donated the ashtray fitting. Got a thick plate of aluminum and fitted to the opening. Drilled a 3 inch hole and then bought the perfect poker table SS drop in cup holder off a poker website. Sanded it to a brushed finish. It holds a can or medium sized drinks. Enjoy

61397

Perfect! Simple and functional, non intrusive, cheap and easy to make

I'm stealing this.

[Lwanmtr]

If i could work metal I'd make one myself...lol

[Jonathan]

Just saw this drink holder option on the DeLoreanGo website.

https://www.deloreango.com/ca/drinks-holder.html

Anyone got one? Care to do a review for us?

I'm curious about where the screws access is and exact dimensions of the cup holes (diameter and depth).

[Lwanmtr]

Looks decent enough. Size looks like it will hold cans, but nothing larger..maybe couple inches deep.

Only thing that kinda kicks is the price... $82.99 USD seems kinda steep.

[CFI]

I'm curious about where the screws access is and exact dimensions of the cup holes (diameter and depth).

The screws are in the coin tray. On my car they’re not even hidden, they’re just sitting there near the front edge. As for dimensions it should be easy enough to figure out if you have a can of coke handy.

[jamesrguk]

That was the largest size I could really fit in the space, this fits with zero modification to the car, you can even use your original screws if you like.

I'm biased of course as I designed/make them, but a few folks have now started fitting them and posting pics/comments on various DeLorean Facebook groups so Im sure they'll be plenty of unbiased reviews.

Pic of grey version I did, personally I prefer the black/grey contrast.

Jhttps://uploads.tapatalk-cdn.com/20191221/7e01afa87d8afaf8b955d54e2df781d9.jpg

Sent from my SM-G920F using Tapatalk

[jamesrguk]

Screw access shot to answer earlier question, holes are counterbored so the screws sit below the surfacehttps://uploads.tapatalk-cdn.com/20191221/9854362e3da68f8acc47b9384133a0e3.jpg

Sent from my SM-G920F using Tapatalk

[Jonathan]

Screw access shot to answer earlier question, holes are counterbored so the screws sit below the surfacehttps://uploads.tapatalk-cdn.com/20191221/9854362e3da68f8acc47b9384133a0e3.jpg

Sent from my SM-G920F using Tapatalk

Thanks. That's pretty much the only reason I asked about the screws. Picture shows what I wanted to know. Good job.

[bueller]

I like the pic of the gray one, but I don't see that offered on the website. Is it available?

[adam_knox]

Is the delorean go grey one an exact color match to the arm rest console? Can someone with the black one who has a grey interior take s picture of it with the door open (like a full interior kinda shot)?

Anyone use the delorean go one with a large fast food cup from McDonald's or taco bell? Does it fit and hold it in place when you make a turn with the car?

Sent from my SM-N950U using Tapatalk

[jamesrguk]

Is the delorean go grey one an exact color match to the arm rest console? Can someone with the black one who has a grey interior take s picture of it with the door open (like a full interior kinda shot)?

Anyone use the delorean go one with a large fast food cup from McDonald's or taco bell? Does it fit and hold it in place when you make a turn with the car?

Sent from my SM-N950U using Tapatalk

This really is for cans and small drinks, it was either two regular cans/regular cup of take away coffee or one large hole for a large drink to fit within the confines of the original space.

I have had mine in for a few weeks and the holes are plenty deep enough (you can probably work it out from the photo of the can) for nothing to fall.

Colour wise...
The grey interiors are a nuisance to match, especially after 40 years of fading etc... the one in my photo is of my car when I was testing some colours, my cars all leather so not OEM anyway and although it was a good match, I have subsequently swapped if for a black one as I prefer the look (all personal taste of course).

I've always thought if you can't get a 100% match its probably smarter to go for contrast.

Thanks for the questions

J

Sent from my SM-G920F using Tapatalk

[Brian_SS_TT]

Finally got around to making one.....Added a coin tray light, (2) rear facing lights and a USB 3.0 Power Source. Easy disconnect and removal to get under shelf.

62115

[Rich_NYS]

Finally got around to making one.....Added a coin tray light, (2) rear facing lights and a USB 3.0 Power Source. Easy disconnect and removal to get under shelf.

62115That looks great! That's one I'd definitely pay >$80 for.

[Michael]

That looks great! That's one I'd definitely pay >$80 for.

Ditto! That's 80 bucks worth.

[Lwanmtr]

That looks great! That's one I'd definitely pay >$80 for.

Yup, same

[Helirich]

Has anybody made cup holders for their car? I definitely want some, I am not keen on changing the stock look. I feel that a classic car should stay (for the most part) stock. So I would like to make some kind of classy looking "add on" cup holder that I don't have to cut up the console or dash. I would love to see how others did it. Pics please.

[Timeless]

https://www.youtube.com/watch?v=jvbSR88iLCY

[dn010]

http://dmctalk.org/showthread.php?391-Cup-Holder-Options

[Helirich]

http://dmctalk.org/showthread.php?391-Cup-Holder-Options

Funny that thread didn't show up on a search.

Thanks

[ssdelorean]

Already there. Free. Done. :-)

http://dmctalk.org/showthread.php?391-Cup-Holder-Options&p=20298&viewfull=1#post20298

[CFI]

Has anybody made cup holders for their car? I definitely want some, I am not keen on changing the stock look. I feel that a classic car should stay (for the most part) stock. So I would like to make some kind of classy looking "add on" cup holder that I don't have to cut up the console or dash. I would love to see how others did it. Pics please.

IMHO, it doesn’t get any better than these: https://www.deloreango.com/us/catalogsearch/result/?q=Cup+holder

[Helirich]

IMHO, it doesn’t get any better than these: https://www.deloreango.com/us/catalogsearch/result/?q=Cup+holder

Those look nice! Do you know what the diameter of the hole is. My wife and I use YETI cups (or their clones) all the time.

[CFI]

Those look nice! Do you know what the diameter of the hole is. My wife and I use YETI cups (or their clones) all the time.

Approx 2 3/4 inches wide. A soda can fits in with a little room to spare, as does a 20 ounce soda bottle. When I’m not using the cup holders I have a small DMC bag that I place over them. This not only holds phone chargers, EZPass, garage door opener, etc, but also hides the cup holders.

6563365634

[Helirich]

Approx 2 3/4 inches wide. A soda can fits in with a little room to spare, as does a 20 ounce soda bottle. When I’m not using the cup holders I have a small DMC bag that I place over them. This not only holds phone chargers, EZPass, garage door opener, etc, but also hides the cup holders.

6563365634

Thanks,
Not sure if that is big enough for the insulted cups we use. I might make something out of stainless. That's one thing about this car is bare stainless looks appropriate.

[Helirich]

[Thread Merged]
So after viewing the other cup holder thread, I decided to try my own hand. I really liked the ones that fit in the original pocket between the seats. The only issue I saw was you can't reach back there easy. Also, I'm not sure if a "Yeti" cup will fit. (A must design criteria for my wife and I)

First thing to do was get out the "CAD" (cardboard aided design)

https://www.supermotors.net/getfile/1164265/fullsize/dscn2299.jpg

https://www.supermotors.net/getfile/1164266/fullsize/dscn2298.jpg

Next, transfer it into aluminum.

https://www.supermotors.net/getfile/1164299/fullsize/dscn2310.jpg

Put a bend in it. Actually did this multiple times to get the right bend.

https://www.supermotors.net/getfile/1164300/fullsize/dscn2311.jpg

It is held on by the two screws that hold the pocket. The problem was my screws were junky sheet metal screws that wouldn't hold something like this. So I put a couple nutzerts and 12-24 screws. Scotch brited the surface and Walla!

https://www.supermotors.net/getfile/1164301/fullsize/dscn2314.jpg

Yeti cup installed. It might appear to interfear with your arm, but it doesn't. The small amount that it moved the cups forward helps a lot in comfort.

https://www.supermotors.net/getfile/1164302/fullsize/dscn2315.jpg

Finally figured out how to post pics from my Supermoters account.

https://www.supermotors.net/getfile/1164267/fullsize/dscn2309.jpg

[Lwanmtr]

You gonna make for other folks?

[Michael]

I posted this in another thread I started, but figured I should put a copy here.

So after viewing the other cup holder thread, I decided to try my own hand. I really liked the ones that fit in the original pocket between the seats. The only issue I saw was you can't reach back there easy. Also, I'm not sure if a "Yeti" cup will fit. (A must design criteria for my wife and I)

The simplest solution tends to be the best. Noice!

[dn010]

And you don't smash your elbow into it shifting? Personally there is no way I could do this, maybe it is because my arms are long but I need room in order to shift and be comfortable.

[Helirich]

And you don't smash your elbow into it shifting? Personally there is no way I could do this, maybe it is because my arms are long but I need room in order to shift and be comfortable.

Honestly, I haven't driven the car since installing it. (Im waiting for new fuel lines) If it's a problem, I'll post back.

[ssdelorean]

Personally there is no way I could do this, maybe it is because my arms are long but I need room in order to shift and be comfortable.

Ditto. My elbow must bend like yours. I could not have the cups where my arm goes.

[Helirich]

Ditto. My elbow must bend like yours. I could not have the cups where my arm goes.

I just sat in the car and ran through the gears. It's not a problem. I find it's uncomfortable to have my elbow on top of the console. I'm 5'10" and with the seat at a nice location, my arm is going diagonal to the shifter. My shoulder is next to the cup holder, not over it. I guess a taller guy might have a problem.

[Midnight Specialist]

these from delorean go are great. https://www.deloreango.com/us/drinks-holder.html

[ssdelorean]

I just sat in the car and ran through the gears. It's not a problem. I find it's uncomfortable to have my elbow on top of the console. I'm 5'10" and with the seat at a nice location, my arm is going diagonal to the shifter. My shoulder is next to the cup holder, not over it. I guess a taller guy might have a problem.

We either have different driving styles or my seats are the issue. I am same height as you and my arm has always rested atop of the center area and was not uncomfortable. My seat bottoms ripped out and I had them fixed. Fixed a little too good I think as my head is using more of the headliner space and I am sitting higher than in the past.

[dn010]

I'm 6' and I must have really long arms because my elbow has quite frequently knocked into junk stuffed in the coin try upon shifting into 2nd or 4th.

[SS Spoiler]

Imagine trying to shift a
crap to the future car.....

[Helirich]

We either have different driving styles or my seats are the issue. I am same height as you and my arm has always rested atop of the center area and was not uncomfortable. My seat bottoms ripped out and I had them fixed. Fixed a little too good I think as my head is using more of the headliner space and I am sitting higher than in the past.

I just got done driving it around my yard. I could only get to second, but didn't notice any problem. Maybe if I was playing Ricky Racer, I would keep my arm up there. I will say my seats seem kind of low. The leather is in great shape, but maybe the springs/padding is wore out and has me sitting kind of low. That's why my arm is kind of uncomfortable on the console. (Lots of headroom) The guy I bought it from had thick sheepskin covers. Haven't tried them yet.

If I find I want my seat higher and then my arm is wrong, I think I could make another cup holder that could flip front or back. Then if I was getting aggressive, I could flip it back and more out of the way. I don't really see me driving this car aggressively because I have a new Vette that really is ridicules fast. (If I want that) I'm more of a cruiser in my old age.

[ssdelorean]

I just got done driving it around my yard. I could only get to second, but didn't notice any problem. Maybe if I was playing Ricky Racer, I would keep my arm up there. I will say my seats seem kind of low. The leather is in great shape, but maybe the springs/padding is wore out and has me sitting kind of low. That's why my arm is kind of uncomfortable on the console. (Lots of headroom) The guy I bought it from had thick sheepskin covers. Haven't tried them yet.

If I find I want my seat higher and then my arm is wrong, I think I could make another cup holder that could flip front or back. Then if I was getting aggressive, I could flip it back and more out of the way. I don't really see me driving this car aggressively because I have a new Vette that really is ridicules fast. (If I want that) I'm more of a cruiser in my old age.

Flipping your design back would also provide more depth for your tall mug.

[Helirich]

So SSDelorean was right or he brainwashed me into not liking my cup holder. Actually, I can't say I don't like it, but sometimes it is slightly in the way.

So back to the CAD. (Cardboard aided design)

66268

Transfer to aluminum. Out with the old, in with the new.

66269

This new design allows me to rest my arm on the center for those cruise through town when your not sure if your going to upshift or downshift.

66270

You also might notice it's shaped like a point in the front. That adds to the speed.

[DMCMW Dave]

(Cardboard aided design)


Soda came out my nose. Best comment on here in a long while!

[Helirich]

Soda came out my nose. Best comment on here in a long while!

It's an old joke I stole.

In other news, I took a long drive with the new cup holder and I love it. The old cup holder is really not bad. I actually like the looks of it better, but on a standard car it is not ideal. If anybody has a automatic and wants it, PM me. (No charge)

[artisticent]

It's an old joke I stole.

In other news, I took a long drive with the new cup holder and I love it. The old cup holder is really not bad. I actually like the looks of it better, but on a standard car it is not ideal. If anybody has a automatic and wants it, PM me. (No charge)

I have an auto and definitely looking for a solution. Are you saying the cup holder with the 2 holes front to back is not conducive to a manual because of your arm hitting it as you're shifting? It seems the cup holders being next to each other in the earlier pictures is the best all around.

[Helirich]

I have an auto and definitely looking for a solution. Are you saying the cup holder with the 2 holes front to back is not conducive to a manual because of your arm hitting it as you're shifting? It seems the cup holders being next to each other in the earlier pictures is the best all around.

No, the holes front to back is good for a standard shift. The holes left and right would be better for a auto. If you look at Deloreango site, they have a left/right holder that looks great, but the cups are so far back it's tough to reach. Both of my designs are easier to get at, but the left/right is slightly in the way for shifting.

If you would like to try the left/right, it's yours. The only thing you might need to do is install nutzerts where your screws go. I had to because the screws were kind of weak to hold it. I went to 10-32 size screws.

[artisticent]

No, the holes front to back is good for a standard shift. The holes left and right would be better for a auto. If you look at Deloreango site, they have a left/right holder that looks great, but the cups are so far back it's tough to reach. Both of my designs are easier to get at, but the left/right is slightly in the way for shifting.

If you would like to try the left/right, it's yours. The only thing you might need to do is install nutzerts where your screws go. I had to because the screws were kind of weak to hold it. I went to 10-32 size screws.

I would love to give that a go, thank you. Let me know if I can venmo shipping. Im still not sure how the left and right config is worse for manual shifting but I prefer the look. On another note, I agree that the cup holder solution in the very back is too far back . I might powder coat yours black. It will look great.
Thanks

[Helirich]

I would love to give that a go, thank you. Let me know if I can venmo shipping. Im still not sure how the left and right config is worse for manual shifting but I prefer the look. On another note, I agree that the cup holder solution in the very back is too far back . I might powder coat yours black. It will look great.
Thanks

PM me a address. I don't care about the shipping cost. (I'm not going to ship it overnight)

[kinvilje]

Greetings! I splurged and went with the DeLorean dual cupholder and smartphone holder. PROS: Great Quality 3-D printed. Easy to install! Looks great! Replaces stock catch-all tray. CONS: Cost $96. Inconvenient Location in car (not a great place to store a phone or a drink).

Overall, would make the purchase again. I use it every time I drive, have learned how to properly reach for my drink, and use the smartphone holder to hold the remote for my homemade flux capacitor.

https://www.deloreango.com/us/drinks-holder.html

[artisticent]

PM me a address. I don't care about the shipping cost. (I'm not going to ship it overnight)

Thank you, ill PM you now

[Helirich]

I guess I should update this thread also. If any of you guys are thinking of copying my cup holders from above, after driving a few hundred miles, I do not recommend that design for a standard shift car. (I think it's still fine for an auto) I changed mine to a new style that I like much better for shifting. It is centered on the rest, but could be made offset if you even wanted more room for your arm. (At the expense of the pax.) It is real easy to reach the front cup holder. (I would say that is reserved for the driver) The ashtray still opens, but I don't care about that. I might even cover it.

66287

[artisticent]

I guess I should update this thread also. If any of you guys are thinking of copying my cup holders from above, after driving a few hundred miles, I do not recommend that design for a standard shift car. (I think it's still fine for an auto) I changed mine to a new style that I like much better for shifting. It is centered on the rest, but could be made offset if you even wanted more room for your arm. (At the expense of the pax.) It is real easy to reach the front cup holder. (I would say that is reserved for the driver) The ashtray still opens, but I don't care about that. I might even cover it.

66287

Received your side by side and love them. Thank you so much. Very kind. Ill take a picture when I screw them in this weekend

[Helirich]

Received your side by side and love them. Thank you so much. Very kind. Ill take a picture when I screw them in this weekend

I hope they work out for you. I think they will be fine for an automatic. If not, it won't hurt my feelings if you report back here and tell others. I wouldn't want someone copying them if they won't work.