Mounting Diamond Select FC behind the seats.

[SIMid]

So basically, who has made a temp rig to hold their FC during car shows? I know many have then just sitting on the pacel shelf and I know of one who had made a false wall.

If you have any pics, please share.

I don't want it permanent, just something temp so I can have it up on car shows and removed for all other drives.

[Michael]

Mine is a replica built from an actual box so it has holes in the corners. I just use zip ties in the top corners and tie them to the cargo net hooks. If you have no holes in yours maybe a few big strips of velcro to stick to the carpet.

[SIMid]

Mine is a replica built from an actual box so it has holes in the corners. I just use zip ties in the top corners and tie them to the cargo net hooks. If you have no holes in yours maybe a few big strips of velcro to stick to the carpet.

That's not a bad idea (they have holes top and bottom), is yours as heavy as the Diamond Select version?

[DeLorean03]

You mean like mine (: ? Click on it for a larger image.

15226

[mluder]

I built a stand out of wood. I'll get some pics and post them later.

Steve

[thirdmanj]

If you're not going to drive with it. Just set it on the shelf.

[Nicholas R]

You mean like mine (: ? Click on it for a larger image.

15226

I recommend this. It works very well. I mounted mine very similarly using coat hanger wire as shown here^. Only difference with my setup is that the wires weren't quite as long so the FC sat at an angle instead of vertically. Just depends what you want.

[DeLorean03]

Up close shots of my mount, which are nothing more than wire coat hangers.

152331523415235

[thirdmanj]

Just ask Chad how he did it.

[SIMid]

just ask chad how he did it.

hahaha!!