Stage 1 Exhaust

[Josh]

I know its a long shot, but I figured I would ask. I was considering buying new (I may still go that route) but I plan to go F/I in a few years, so if I can find a used setup that would be awesome. Does not need to come with hardware or gaskets. Not interested in the special T exhaust.

Thanks for looking!

[Shuttleman]

Hi, I have a DMC Stage 1 first gen ( Jet hot coated not stainless) for sale. It is in really good condition since it was installed by the previous owner and look like the car had never been driven with it because their is no dicoloration of the metal. I see the engine has been started because the inside is black but that's it.

The previous owner started a restoration and I bought the car in a half dismantled state.

I ask 750$ plus shipping, I might also sell the whole engine later on because I'm doing a swap.

[Josh]

Hi, I have a DMC Stage 1 first gen ( Jet hot coated not stainless) for sale. It is in really good condition since it was installed by the previous owner and look like the car had never been driven with it because their is no dicoloration of the metal. I see the engine has been started because the inside is black but that's it.

The previous owner started a restoration and I bought the car in a half dismantled state.

I ask 750$ plus shipping, I might also sell the whole engine later on because I'm doing a swap.

You have a PM sir. Also a fellow Canadian :D

[DMCflux]

http://www.ebay.com/itm/300959981547?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648

[eagle-co94]

Josh, I'm pretty sure you've got a good thing going on with Shuttleman, but I've also got a Stage I setup that I'm willing to sell. It is used but was recoated and has been sitting in the box it came in. Let me know and I can open the box and get you pics.

[Shuttleman]

21857218582185921860218612186221863218642186521866 2186721868

As you will see in the pic their is scratches on the muffler and their is one spot on the header were there is dicoloration and coating loss. The rest is good.

The u clamp are metal and have surface rust, I would put stainless instead.

[Shuttleman]

21872218732187421875

[Josh]

The deal is done with Shuttleman (Olivier), excellent gentleman to deal with!

This thread can be closed up if need be.