Stainless 304 DeLorean Plates "giveaway"

[ALEXAKOS]

Hey Guys,

You may have seen my lit door sills project, I created some laser cut stainless steel plates.
http://i821.photobucket.com/albums/zz135/alex-akos/delo%20resto/03C4FC71-C93D-473F-ABDB-9BEC2D4CC364_zpssa37q71w.jpg

As I could not have only one pair laser cut, they cut me something over a dozen. So I am am practically "giving away" the rest of the plates.
http://i821.photobucket.com/albums/zz135/alex-akos/0946439F-7C92-446E-84D5-2AF6F46D6369_zps05onoomo.jpg

Those were brushed with various methods to test. So their texture needs to be re-grained.
http://i821.photobucket.com/albums/zz135/alex-akos/B473D0AE-F00A-4A2B-AE66-E5F6F37A8B6E_zpsh1q72m5f.jpg

THE LETTERS ARE LASER CUT TO BE REMOVED!

All you need is a 60 grade sandpaper and patience to get those looking smoothly!
Price is less than cost that is why I am calling this a giveaway. Aprox. 12-15USD is for the registered shipping alone.
Charging 17USD for each with traceable parcel worldwide included!
For more than one, each additional is + 7USD

Thanx

[Tillsy]

If I didn't already have illuminated sills I'd intentionally pay you extra - you're selling them too cheap for the investment and work you've done.

[refugeefromcalif]

Ohhh Alex. I definitely need to buy two from you! (One for each door). :tongue2:

PM me your PayPal info, and I'll get you paid after work today.

George

[ALEXAKOS]

If I didn't already have illuminated sills I'd intentionally pay you extra - you're selling them too cheap for the investment and work you've done.

I am not really "selling". I am giving them to friends;)
After all, I am not giving away illuminated sills.
I am selling plain stainless plates with cut out letters.

All of the work has yet to be done:mallet:

PS NOTE THAT I WILL BE OUT OF TOWN FOR A WEEK starting tomorrow, so please any reservation placed after tomorrow will have to wait for a week until shipping.
Thanx

[Patrick C]

PM sent!

[alexwolf1216]

PM sent

[ALEXAKOS]

I either have 9 or 5 of those still available.
Expecting final answers.

Anybody else up for one or two?

[Kenny_Z]

PM sent

[Flash66]

PM sent

[ALEXAKOS]

only four left!

[robvanderveer]

If no one else wants one, i'd might put one up on the garage wall as decoration..

[ALEXAKOS]

If no one else wants one, i'd might put one up on the garage wall as decoration..

Must be a focusing point cause these are not all that big to be noticeable in a garage.

Right above the outer garage door lock maybe or on the House-garage joining door as a sign ;)

[robvanderveer]

i am the only one entering that garage anyway. I'll probably hang it above to my "ROB" plates from TT, next to my huge wiring diagram.

[ALEXAKOS]

i am the only one entering that garage anyway. I'll probably hang it above to my "ROB" plates from TT, next to my huge wiring diagram.

Well Rob, this is your chance to own one!!!

I just sold a single one so one for you is available.

LAST PAIR STILL HERE!!!!!

Or two single ones

[robvanderveer]

i just spent all my allowance on a connector kit. Ironically, the connectors are more expensive than the entire keyless entry module.

[ALEXAKOS]

i just spent all my allowance on a connector kit. Ironically, the connectors are more expensive than the entire keyless entry module.
hahahaha
Same seller? Maybe that is the catch:P




Okay then THREE PLATES STILL UP FOR SALE!

[wtbstuff]

I got mine today. Thank you very much !!!

[Kenny_Z]

Got mine two days ago. They are very nice.

[ALEXAKOS]

Looking forward to see what you make out of them guys:)
A pleasure.


TWO PAIRS STILL AVAILABLE!

[robvanderveer]

you can also use these to spraypaint the route for the next event!

[Dangermouse]

Alex put me down for one. I will PM you on Monday.

[beernpizzalover]

I'd definitely like one for display! Will PM you.

[ALEXAKOS]

Mouse you just reserved the last one;)

Stock is out guys!!!

From now on I only have DMC AND DELOREAN READY MADE PLATES FOR THE ILLUMINATED DOOR SILLS

THANX

[ALEXAKOS]

Mouse you just reserved the last one;)

Stock is out guys!!!

From now on I only have DMC AND DELOREAN READY MADE PLATES FOR THE ILLUMINATED DOOR SILLS

THANX

One fella just ordered one out of a pair,
so

ONE MORE SITTING ON THE SHELF FOR YA!!

Come an get it. :rock_on:

[refugeefromcalif]

Alex, Got my Illuminated set in yesterday. I have to say, It all looks Great! :thumbup:
I Love the little extra vinyl bits. :partyhat: Guess which one is going on my Mini-van. :biggrin:

Now I have to find some old/good sills that I can cut up for the installation. (I can't find the courage to cut my originals)...

Thanks Again!

George

[Timebender]

Mouse you just reserved the last one;)

Stock is out guys!!!

From now on I only have DMC AND DELOREAN READY MADE PLATES FOR THE ILLUMINATED DOOR SILLS

THANX

Where do you have those posted?

[ALEXAKOS]

Hi,
Under delorean parts I think.
Search for illuminated sills and you'll find em:)
Thanx

[ALEXAKOS]

Where do you have those posted?

Sorry couldn't do this with tapatalk.
here is the link (http://dmctalk.org/showthread.php?9992-Illuminated-LED-door-sills-UPGRADE)

[Timebender]

Thanks!

[ALEXAKOS]

Alex, Got my Illuminated set in yesterday. I have to say, It all looks Great! :thumbup:
I Love the little extra vinyl bits. :partyhat: Guess which one is going on my Mini-van. :biggrin:

Now I have to find some old/good sills that I can cut up for the installation. (I can't find the courage to cut my originals)...

Thanks Again!

George

Sorry G!
Just saw that reply.
Contact James eagle99co.
He must have some used sills for you.

I say go for it! Cut your sills. Parts show up all the time. I am sure you will find some in the future.

If you need any help with the is talkathon, drop me a mail. We are no strangers:)