I would start by checking the oil and then doing a compression test with a mechanical oil pressure gauge attached to see what is going on inside. If...
It is possible to send the ignition cylinder out and have it recombinated so the door key will work in it (as long as you have the 1 key system). If...
Include the VIN #. For some cars they have a table of key codes to VIN's. Of course that can only work if it was not changed. If you only have 1 set...
You can put the key in a photocopy machine and print out the key. Scan it and send it to James to decode. Other locksmiths should also be capable of...
Thanks for clarifying things. Everyone has their reasons for owning an old car. Trying to read your thoughts by reading your posts is a stretch and I...
While this scheme is legal and possible, miss one payment and any potential savings is lost. A risky strategy with low potential gain, large possible...
There have been more than a few comments about how it looks kind of like a Delorean on many media outlets. At least from the older commentators. IMHO...
The use of copper was very common on older gaskets usually as rings around the holes that coolant passed through the gasket. Copper is also used as a...
A smoke test is where, with the motor off, you pressurize the induction system with smoke. Any tiny leak and you will see wisps of smoke coming out,...
Stay away from any of the "exotic" stuff. It is expensive and unnecessary. The good old green stuff is just fine. Mix it 50/50 with soft water. Test...
Well, you are getting "false air" leaking in somewhere then. Either you find it visually or you do a smoke test to find the leak. A missing gasket, a...