You don't just twiddle those screws. There is a procedure. If you don't have them right you can damage the throttle shaft, the stop screw is supposed...
Exactly what product did you use for the floor, manufacturer and product name. Chips too. So you did grind first. Makes a horrible mess! But at least...
I am currently in the process of moving so I get to do the garage all over again. I am looking into LED lighting. Not only is it brighter, it is way...
I have a large workbench with a big vise mounted to it. I keep my toolboxes small enough and light enough that they can be easily carried so I can do...
OK, we're getting somewhere. We know the ECU is getting power and the mixture is lean. Try doing and undoing the plug on the frequency valve a couple...
You can pressurize the cooling system before you put the intake manifold back on to make sure you have no leaks before you go through all of the work...
One thing about the Service Manual. Do not go by the picture. Be really careful which way the diff comes out so you put it back correctly or you will...
It wouldn't be the wires to the starter, the "big" one is hot all the time (at least it is supposed to be). The little ones would not be able to dim...
Find latest posts