Hi, I am new to the forum. I have had my delorean for quite awhile. I purchased it from my brother's estate when he passed with the intent of getting it going in his honor. The motor had been overheated when he had it and it hadnt been started in a very long time. So I sent the motor out and had it done over, new rings, bearings, valves and guides. The fuel distributor redone. Once I got it back in and tried to get it going had no luck. My other brother suggested it was timing, long story short he was right, it was off 180. Pulled out the distributor found top dead center on comperssion, and it fired. Since then I have painstakingly found, several things that i missed or over looked. Thought I had the o2 sensor hooked up but didnt. Replaced the injectors, then the latest was the seals and clips for the injectors. This has been a long process as I work out of town and cant always work on it. Any way when I would get it running I could never get it to idle down and stay running, likely the unconnected o2 sensor at that time. The fuel pump is new the fuel filter has been changed several times, the acccumulator is new. I even have a new ECU that i recently happened on at an auction. Threw out all this I played with the co. Any way I can pull an injector out hotwire the rpm relay get fuel coming out of the injector. When I try to start it either with the relay jumped or with the relay in, the plugs are still dry. It wants to fire but just wont catch. By the way the dmc in my user name stands foir delorean making me crazy.