2 Attachment(s)
AC Clutch Don't Engage With 12V Jumped To Pigtail
I'm having the same issue. #10 fuse is fine. Last fall I accidentally yanked the wire that goes to the compressor loose while trying to take the intake manifold off. It came apart at this junction and I can feel it click into place (I think) when I try to put it back together, but the center of the compressor still doesn't turn.
Attachment 56269
It's this compressor (r-134), looks kind of the aftermarket one DMCH sells but I don't think it actually is.
Attachment 56270
What are the odds that something else just happened to go wrong after I messed with that wire? The A/C was working fine last fall. I haven't used it all that much (probably less than 8 hours total in almost 2 years, mostly for less than 20 minutes at a time if I'm in stop and go traffic, once for a few hours on the way back from Vegas). The compressor was replaced by the seller and the lines were replaced at DMCMW after I bought it (it still had the old R12 fittings). They put 12oz of 134 back in it b/c it had been leaking with the old fittings. It can't have all gotten used up since then, right?
that black wire goes into the compressor between the pulley and the body of the compressor, is there anything user-serviceable in there? I'm worried that I yanked something loose on the compressor side of it.