Taillight interior dust reduction

The parking/running taillight is a great dust collector, mostly due to the huge openings top and bottom. Having a lot of dust stored in there (including in the grooves of the red lens) does not improve light levels!

Here is what they normally look like:
Attachment 58077

I blocked mine off with foam in a friction fit. There are other ways to reduce the opportunity to get into the lens area such as Gorilla Tape or some form of plastic shield.
Attachment 58078

If you do not have LED's installed, then you may want to maintain the ventilation. But even with the foam, there is still ventilation holes under the circuit board.

FYI

Nick,
You're certainly right. The whole rear end of these cars just suck up the dust. This seems like a helpful solution.

Since we're on the topic of taillights, I've always had a question about the "taillight reflector" that I've seen on the vendor sites:

Attachment 58080

Where does this reflector fit in with the taillight? I don't find it in the parts manual but it has a part number and is listed on a couple of the vendor sites.

Ron

Quote:

---

Originally Posted by DMC-Ron

Nick,
You're certainly right. The whole rear end of these cars just suck up the dust. This seems like a helpful solution.

Since we're on the topic of taillights, I've always had a question about the "taillight reflector" that I've seen on the vendor sites:

Attachment 58080

Where does this reflector fit in with the taillight? I don't find it in the parts manual but it has a part number and is listed on a couple of the vendor sites.

Ron

---

The reflector fits here, behind the running light:
Attachment 58090

Quote:

---

Originally Posted by MikeWard

The reflector fits here, behind the running light:
Attachment 58090

---

Thanks, I always wondered because I didn't see it in the parts breakout.
Ron