http://ohiodeloreans.com/images/tips...rFlaps-Lrg.jpg
Well I tried it. It wasn't a great success. I suspected it wouldn't be but I wanted to try it before making a comment. In my case, and presumably most cases, the console corners are curled out. In those pics, the area below the clips, closer to the corners needs to be pulled in. Or indeed, the corners themselves. Pulling the two sides of the console together as described, does not "fix" the curled-out corners. It may make it less obvious, but it is not a proper fix in my opinion. If there was some way to get the clips in the described method down on the corners, then you could pull the curls in. So, its back to the drawing board as far as I am concerned! There's got to be a way to get those corners in. :)