You jumpered to the white/purple wire?
Sent from my iPhone using Tapatalk
Printable View
You jumpered to the white/purple wire?
Sent from my iPhone using Tapatalk
Did thishttps://uploads.tapatalk-cdn.com/201...6baeb4ab86.jpg
Sent from my SAMSUNG-SM-N920A using Tapatalk
That feeds into the main fuel relay, according to the wiring diagram and the lambda thingy is in tha circuit too
Okay, with the jumper installed, go to the fuel pump and see off the white/purple wire has 12v.
Sent from my iPhone using Tapatalk
Remove spare tire, then remove the panel in the tire well.
But before you do that. Check to see if the inertia Switch is tripped, red button popped up. It is mounted on the left side of the drivers footwell.
Post a photo of it.
Sent from my iPhone using Tapatalk
It was pushed down. It slides up and down quite easily https://uploads.tapatalk-cdn.com/201...fdda6cec40.jpg
Sent from my SAMSUNG-SM-N920A using Tapatalk
Okay, on to the fuel pump then. Post another photo when you get the acces panel removed. You should see a 2 wire connector. You can probe the white/purple at the connector for 12v. If you get power. Then do a continuity test of the other wire to Chassis ground. If you have continuity to ground. (Your pump is Dead)
Sent from my iPhone using Tapatalk
Now that may be something as I am currently pulling the interior out for upholstery. Does that ground for the fuel pump come inside the firewall or stay in the trunk bay??
It is inside but should not be in an area you would disturb with carpet removal. The inertia switch breaks the Ground path if tripped. You still need to get to the fuel pump to check things out.
Sent from my iPhone using Tapatalk