Replacing Hard Line From Accumulator to Filter
Is there an easy way to replace that line without lifting the body from the frame or am I asking for serious trouble?
The goal is to make changing the fuel filter a more simple task because the elbow fitting at the bottom of the filter with the hard line's press fit into it drives me crazy. I usually end up disconnecting the main line from the distributor and ultimately unthreading the filter at the elbow and leaving the hardline connected to the elbow.
I'm considering a stainless braided line from accumulator to the filter from a vendor but A) it's a larger diameter so I'm not sure about installation and B) not sure if it'll change anything with the fuel/rest pressure but I seriously doubt that.
Thanks.