Originally Posted by
82DMC12
Good point. I literally just checked flow with six jars in like, September, so I'm sure it all has to be good in terms of pattern and volume. Even if it wasn't, it would still run, just crappy. I can't even get it to idle right now.
Am I correct in that I can get a baseline CO by pulling an injector, placing it in a jar, jump the RPM relay, then check for spray. Turn the CO screw clockwise (richer) until I get a spray, then back off until it just stops? I already know I'm not flooding because I had all six injectors out when reinstalling the whole fuel injection and I did do a quick RPM relay jump to make sure I was leak-free before putting the injectors back into the ports.