1 Attachment(s)
ALIGNMENT specs with upgraded suspension?
Attachment 61072
I have Eibach upgraded suspension and wonder when i get an alignment if i use the same specs as stock suspension?
I believe these are stock:
Toe-In: 3mm (0.12 inch) per wheel
Caster Angle: 3.5° to 4° Positive non-adjustable
Camber Angle: 0° to 0.5° Negative
King Pin Inclination: 6° ± 0.5° - 0° non-adjustable
this is taken from maintenance manual :
https://archive.org/stream/DeLoreanM.../n125/mode/2up
Which adjustable arm is needed
I see that in order to make the lowered suspension camber get back to spec i would need an adjustable rear control arm. I see that both upper and lower ones are sold. I cannot see where both would be required so which is needed to typically adjust the proper camber?
upper
lower