Originally Posted by
David T
While the procedure in the manual and the bulletin is good, IMHO it is lacking. It assumes the anchor pins have been properly adjusted and both latches achieve "second locking position" simultaneously. That should be done BEFORE trying to do the internal door adjustments. Many times the reason the doors need internal adjustment is because both latches don't get to the second locking position and then you try to lock the door and force it and bend the rods. So check and if necessary adjust the anchor pins first and then go over the internal adjustments. The first time you do it it is a little confusing but after that it gets easier and faster. One adjustment affects the others so you may have to do it multiple times. Also be very careful of all of the sharp edges inside the doors. Very easy to cut yourself badly, the S/S is VERY sharp!