Thank You.
That is pretty much how I bent the plexi....finally! :)
Just to be clear, are the lights 1 inch, or are the holes 1 inch?
If I message you, can you clue me in on the sound effects? I assume you use sound chips....
Thanks
Charlie
Printable View
1" hole about 1-1/8" lens. The hex is simply the securing nut above rather than below securing.
https://uploads.tapatalk-cdn.com/201...c538426d7f.jpg
https://uploads.tapatalk-cdn.com/201...4fa700abf8.jpg
Thank You again!
I have been searching on ebay and amazon....and I cant seem to find a pilot light with a 1-1/8 lens. I have been looking at dialco lights as well. Can I ask you where you are purchasing yours. I appreciate all of the spoon-feeding. :)
Sincerely
Charlie
[emoji1312]what Steve said :)
Red w/ faceted jewel:
031-0431-300
http://www.mouser.com/ProductDetail/...khUkHr7Q%3d%3d
or
http://www.newark.com/dialight/031-0...rfnonsku=false
Green w/ faceted jewel:
031-0432-300
http://www.mouser.com/ProductDetail/...khUkHr7Q%3d%3d
Bulb holder base:
031-3101-01-101
http://www.mouser.com/ProductDetail/...hH8QDfBw%3d%3d
or
http://www.newark.com/dialight/031-3...rew/dp/05B3024
http://dmctalk.org/attachment.php?at...4&d=1488998054
You should also be able to search those same PN's and look for other cheaper sources, those were just the quick ones I found that had them in stock.
https://uploads.tapatalk-cdn.com/201...6390ff7223.jpg
I'm down to my last 3 pairs but have more on the way, if you've not found any after a while let me know could prob hook u up.
Hi Mark,
Great detailed info as always! I am grateful for your explanation. That kinda makes sense with what I had observed from various reference images and footage from OUTATIME. I could see that the three holes per heat sinks were shifted between the final holes that we see today. I think there are a few miscellaneous holes also, but don't think it would be fair to trouble you for those. ;)
I am curious to know if you are able to kindly clarify the spacing of the two sets of triangularly spaced holes however. I have noticed that they are quite distinctive to the A car and that they are slightly different to each other. Again, I wouldn't ask you to release anything that is sensitive or of shared intellectual property, but if you are able to calrify those hole positions, that would be really awesome!
Just one last, tiny question if I may?... How many locator pins are there on the lower (side) of the yellow reactor hatch lid? I have calculated from your image that there might be three evenly spaced?