Update on Iron Man Delorean
I have been busy working on the Iron Man Delorean Infrastructure.
VENTED DISC BRAKES
The vented disc brakes are installed. I video of this installation shot at Delorean Weekend will be posted in the future. This conversion was done on the 97 Delorean Time Machine in Las Vegas but it is the same one on the Iron Man Delorean. I am looking for someone interested putting vented disc brakes on their car at next years Delorean Weekend. I have a spare kit for widening the calipers. All you need to buy is the vented rotors.
STEERING RACK.
I installed Rob Grady's rebuilt steering rack. However, I had him make one alteration. There are now thread adjustments on both sides of the rack. This will allow me to adjust the rack to get maximum travel. The hope is to reduce the steering radius. I have driven a D with a different rack and it clearly had a shorter steering radius. However, the new D owner did not know where the rebuilt rack came from.
36" RADIATOR and FANS
The 36" wide (3 fan) radiator is installed similar to a Lotus. Working on wiring the controller for the fans. VERY DISAPPOINTED at the gauge of the wiring to the stock DeLorean fans. I have seen these wires melt on a number of Deloreans. On a number of other Ds they showed heat damage.
14 GAUGE wire is NOT sufficient for any cooling fans. Let alone RUNNING THESE WIRES all the way to the relay box. VERY BAD Design. It might work but the
voltage drop is way to much with this size of wire. I am installing both a 10 GA positive and negative wiring all the way back to the really box where I am
going to mount the fan controller. The controller is adjustable. But I have a concern that the does not have a current ramp for turning on the fans. that would be nice.
What also disappointed me was that the ground for the fans and the other stuff up front rely on frame grounding. IN A PLACE WHERE water and corrosion are always present. BAD DESIGN AGAIN!
AC CONDENSER.
This is installed with 2 fans. 24" wide similar to stock. Will use a second controller relay for these fans. The radiator fans will have to be tied in.
REWIRING THE WINDOW SWITCHES TO THE DOORS.
I am installing a new center counsole with a storage tray and USB power supplies and 2 cup holders. I MOVED the window switches to the Doors.
YES, there are more than enough wires to do this in the stock delorean wiring harness.
Again, I was dissapointed at the gauge of wires supplying the power window motors. These wires take a very long path to the power window motors
and hence have both a voltage and current drop. STANDARD GM design is at least 12 ga to window motors. Why are Ds only 16 ga?
Anyway I got around this by using the 14/12 ga wires that when to the old HEAVY OUTDATED door lock solenoids. I am using Toby's linear actuators.
The wiring now goes to the doors and then to the FULL SIZE power window motors. I cut out the extra 4 feeting of wiring that went to the center console
switches. Much cleaner now and the cup holder goes right in.
I ran into one glitch. The 12 Ga grounding wire to the passenger door (formerly to the solenoid) appears to be broken. I am guess at the door flex point.
Simply got around this problem by making the red with white strip wire the ground.
YELLOW TURNING LIGHTS IN THE MIRRORS.
There are sufficient extra wires in the doors to do this. I am going to use the yellow heated mirror wire.
NO GROUNDING WIRE TO THE DOORS
I was very surprised to find that there was no grounding wire connection to the SS door. I have added a wire for this. Just good practice.
WHERE IS WALDO ? THE FRONT WIRING HARNESS
While working on running the new cooling fan wiring I had to run these to the front of the car. Well, these wires don't run under the car.
They run THROUGH AN OPEN CHANNEL IN THE FIBERGLASS FRONT END!
You have to remove the window washer bottle cover and the bottle to get to the plugs and wires to run additional wires to the front of the car.
You then need to fish the new wires through this HIDDEN channel.
I will be posting pictures later.
Bob
23 Attachment(s)
Update on Iron Man Delorean
Here are some pictures
TIPTRONICS SHIFTER
The tripronics shifter has to be extended to fit the Delorean Frame. This shows the initial cut. It is reangled down about 30°.
UPLIFTED BODY
The front and rear spacers are installed to raise the fiberglass body 1" off the frame. The center and rear bolt holes have be drilled and fitted.
Will put in the final bolts once all the wires and pipes underneath are in place.