Do you need to bench test for that amount of time considering the switches will have data info regarding test info?
Sent from my iPhone using Tapatalk
Printable View
Thank you all for the positive feedback on the project. I'm progressing very slowly now since I'm mostly focused on reproducing front end of my crashed D body.
@ Mark D
You're first on the list when pre-production switches will be available. :)
So far, PCB prototype has been assembled:
Attachment 61002
Now I'm waiting for a couple of mechanical parts the test bench will be made of. Simple electronics for automatic actuation of the switch is being assembled/tested in the meantime.
@ bigmac
If you mean the microswitches on the PCB, then yes, their service life data is documented and available. However, all the custom mechanical parts that actuate the microswitches need to be tested for durability - simply because they've never existed before :) so their behaviour over time is still unknown. Final product must be perfect in every way and reliability is the most important thing here.
Please put me on the list. This switch is perfect for my other customers backlit switches.Attachment 61133
Sent from my iPhone using Tapatalk
Why are there 8 jumpers on the board and does the transistor just control the led?
Sent from my iPhone using Tapatalk
I’d be interested in one too. Anyone have a way to backlight the defog switch?
Sent from my iPhone using Tapatalk
Yes you would need to cast a new cap with a white graphic so the light can get through.https://uploads.tapatalk-cdn.com/201...c8c29e79d1.jpg
Sent from my iPhone using Tapatalk
Never done that. Do you make them? I’d be in for one plus two spares with heated seat logos on them
Sent from my iPhone using Tapatalk
Coming back to the mirror switch project: I've just finished a test bench and endurance test has already begun. I expect first results late next week. Wish me luck. :)
Attachment 61309
https://drive.google.com/open?id=1Ds...fw0qB-2itxhR2E