does anyone know where to get one from? its not listed on any websites as a separate item....
Printable View
does anyone know where to get one from? its not listed on any websites as a separate item....
Isn't this usually built into the filter? All of mine have been...
If you have the old one to use as a reference, I can usually find common sizes at my Ace Hardware store, etc., but if not, and you need an odd specification, McMaster-Carr has an excellent assortment:
https://www.mcmaster.com/o-rings
That's what I did when I refreshed mine.
thanks.. do you remember which one u ordered from McMaster by chance??
What kind of oil filters are you using? This is a strange request. The filter itself has one integrated and no additional one is required.
https://www.deloreango.com/ca/oil-fi...ly-o-ring.html
It doesn't show-up on Houston's page. I don't know why. It has a part number that seems legit as it's one number right after the oil filler itself. I bought one of these for my own car and it fit fine.
Ah, even better.Quote:
Originally Posted by Jonathan
It looks like I found one at my local Ace. It's an old school hardware store that opened in 1945, so they have lots of selection.Quote:
Originally Posted by painterdave72
If you choose this route, just match OD and thickness, and select an oil resistant material (Buna-N or Viton ). Make sure the new one allows the oil filler to fit snugly in place without binding.
I think OP is referring to the o-ring on the black filler cap, not the oil filter.Quote:
Originally Posted by Chris 16409
Quote:
Originally Posted by bytes311
Yup, bytes311 you are correct. I misread it also. Good catch. :thumbup2:
painterdave's post title: oring for oil filler