I got a problem
all the flashers works fine around the car but the right flasher doenst flash in the cluster ?? already changed the bulbs
i ve got no lamda light in the cluster too..
need some help.
Printable View
I got a problem
all the flashers works fine around the car but the right flasher doenst flash in the cluster ?? already changed the bulbs
i ve got no lamda light in the cluster too..
need some help.
Most likely the flex circuit board in the binnacle is the cause for bad connection.
"replaced the bulbs" Which bulbs, the dash bulbs?
If the dash bulbs are intact, replace the printed circuit board. $32 at DMCH:
http://store.delorean.com/p-7080-printed-circuit.aspx
Those things are easy to break a connection on and ridiculous to repair, replacement makes the most sense.
Otherwise, bulb replacement in dash and you'll be set. If you're not sure, swap with a known good bulb in the dash (other blinker? Headlights? High beams? Etc.) and re-check.
Incandescent bulbs blow out far more frequently in blinking locations than steady locations from what I remember. Something about number of times turned on/off rather than hours run. LED's are immune and dim instead.
As a "while you're in there", LED's can be considered. Not the battery light yet -- that one is entirely possible to do but requires careful balancing of two separate circuits and I have not been able to field test yet. No promises.