Has anyone added a knock sensor to an original Delorean 2.85 engine for an EFI conversion?
If so, where would be the correct location to mount one and what would be a good part number to use.
I am wanting an input for my turbo build with megasquirt.
Thanks in advance,
Josh Q
you can use this module with the MSII http://www.viatrack.ca/Quote:
Originally Posted by DeloreanJoshQ
the later efi PRVs have 2 tapped holes in the valley for these sensors
the 2.5 turbo has the sensor bolted to the inlet manifold
Quote:
Originally Posted by BABIS
Also, some of the 2.8lt even firing, had the knock sensor bolted down to the side of the block, in a threaded hole near the base, near the water side output, but is not aviable on the 2.8 odd-firing delorean.
I think on the original block and intake you need to be creative; maybe making a threaded hole in the side of the upper square air intake could be the best easy solution.
Thanks for the tips!