Greetings DCF Members,
Now that Summer is on the way out and the Fall car shows are coming up fast, it's time to have another DCF Tech Day! We had a great turnout at the last one this past Spring, and adjusted a lot of torsion bars that day. This time, we're changing it up a bit.
Have you ever wondered what your car looked like underneath? Have you ever wanted to check or re-torque your TABs but weren't sure how to go about it? Do you have some small-ish jobs to do on your car that would be made 1000% simpler if you only had a lift? Well, my friends... for the first time in a good long while we're going to hold our Tech Day at an actual shop.
With a lift.
And a compressor.
Attachment 46255
Our friend Bruce Coulombe of Coulombe Enterprises LLC has graciously offered to host this DCF Tech Day at his shop in Oviedo, FL. For those of you not familiar with Central FL, it is located just East of the Orlando Metro area:
Attachment 46256
https://goo.gl/maps/jKzSSbe1oGA2
Where:
1293 County Road 426
Suite 121
Oviedo, FL 32765
When:
10AM to 5PM
We are still working out food for the event, and we will post here once we figure that part out. I will bring my Torsion Bar rig (with new and improved hex bit) in case there are any door adjustments needed. We hope to see you guys there!
If you are able to attend, please reply in this thread to RSVP and be sure to include whatever work you would like to do on your car.
Attendance List so far:
Brandon S. (Morpheus) - weld Pivot Bolt nut, A/C work if possible
Robert G. (DeLorean937) - Seat rails, Passenger mirror
Maurice (Dutch) - CO adjustment, brake rattle
Dana (DMC-81) - Torsion bars, door struts, TABs
Dan S. (Dannytr1) - Brake rotos & pads
Evan (Sladelorean) - Torsion bars
Nick R. (Nicholas R) - odds & ends
