AN6 fuel line from the filter

Hello guys,

in the next future I want to upgrade the current rubber hoses I have mounted to braided AN6 fuel lines. I have a couple of questions about them:

- from the fuel filter is better to mount a "AN6 Male to 12mm x 1.5 Male" adaptor with a "AN6 Hose Ends, 90 Degree Bend" or a "AN6 male on 12mm banjo fitting" mouted with a hollow bolt? Right now I don't remember if there is enough space over the fuel filter to mount the first option..

- stock rigid return line: will work the "AN-6 to AN-5 union reducer" ? I know a couple of members here have already mounted it http://www.jegs.com/i/Earl%26%23039%...91907/10002/-1

Best regards

I used a 90 degree bend with no issues. You may have to slide the filter down a little depending on exactly where your bracket is mounted but there was plenty of room on mine.