speedo broke today

Out for a ride and the speedo dropped like a rock to "0", I'm guessing it's the angle drive or something like that. The cars going in the shop Monday, where do I point at so the mechanic can make a fix, assuming there is a fix?

It could also be the cables that connect the angle drive to the speedo or the dust cap that spins the angle drive shaft. None of these are difficult to spot and fix.

Quote:

---

Originally Posted by About time

Out for a ride and the speedo dropped like a rock to "0", I'm guessing it's the angle drive or something like that. The cars going in the shop Monday, where do I point at so the mechanic can make a fix, assuming there is a fix?

---

The angle drive is attached to the left front hub. Your problem could be the dust cap, the quill, the angle drive, lower speedo cable, Lambda counter, upper speedo cable, or the speedo itself. Too many points of failure if you ask me.

You may want to consider a modern, reliable solution instead: http://dmctalk.org/showthread.php?17...light=SpeedBox

Quote:

---

Originally Posted by CFI

The angle drive is attached to the left front hub. Your problem could be the dust cap, the quill, the angle drive, lower speedo cable, Lambda counter, upper speedo cable, or the speedo itself. Too many points of failure if you ask me.

You may want to consider a modern, reliable solution instead: http://dmctalk.org/showthread.php?17...light=SpeedBox

---

Thanks, I'll have it looked at on Monday and see what the mechanic says, we'll play it by ear from there.

You can read through this article and share it with your mechanic to help with the troubleshooting: http://support.delorean.com/kb/a54/s...r-failure.aspx

I happen to have a brand new angle drive, dust cap, and a nearly new lower cable (between wheel and lambda counter) all from DMCH that it turns out I don't need (yet). If you're interested, shoot me a PM.

Quote:

---

Originally Posted by Boxbot

I happen to have a brand new angle drive, dust cap, and a nearly new lower cable (between wheel and lambda counter) all from DMCH that it turns out I don't need (yet). If you're interested, shoot me a PM.

---

Thanks, I will let you know.

On another note, I drove my daughter to school this morning and the speedo is working again.

Any insight?

Quote:

---

Originally Posted by About time

Thanks, I will let you know.

On another note, I drove my daughter to school this morning and the speedo is working again.

Any insight?

---

Not really. Any one of the components can work intermittently.

Quote:

---

Originally Posted by About time

Thanks, I will let you know.

On another note, I drove my daughter to school this morning and the speedo is working again.

Any insight?

---

If you're lucky it'll be the plastic dust cap. Either the cap itself spinning or the square hole on the inside of it that isn't very square anymore. That's the cheapest and easiest component to replace.

Quote:

---

Originally Posted by Jonathan

If you're lucky it'll be the plastic dust cap. Either the cap itself spinning or the square hole on the inside of it that isn't very square anymore. That's the cheapest and easiest component to replace.

---

I'll be showing this thread to the shop owner.