Front Turn Signals are dim with Headlight switch on
Hello All,
Let me start from the beginning....This car has all original wiring intact, no additions or changes. I do have Toby's LMS mod installed, correctly too.
First I installed all LEDs to exterior lighting along with the proper flasher unit, second I installed "Angel Eyes" headlights and everything lights up correctly.
Now this is where things get weird, when I turn on the Headlight switch either in 'Park lights' or 'Head lights' position the front turn signals light very dimly and don't flash properly.
Also I noticed when the Headlights were switched only on 'Low Beam', the 'High Beam' lights were getting some power from somewhere (bulbs were very dim) ?
Turning on the 'High Beams' position, they appear to light properly. Turn signals are still dim.
If I don't use the Head light switch at all, front signals flash properly. Rear turn signals work correctly no matter if using head light switch or not.
Is this a failing Headlight switch? Is this where maybe the "stray voltage" could be lighting my High Beams in the Low Beam position of said switch and causing my turn signal trouble too? :banghead:
I'm stumped any help is appreciated.
Front Turn Signals are dim with Headlight switch on
Quote:
Originally Posted by
Christian Dietrich
I totally forgot about the h4s because I helped out a friend of mine who did that and when I did my Halos I went with LEDs for my low beam and high beams and I still had to do the same thing as well and it totally slipped my mind but that's a good thing that you said that
Sent from my SM-N920P using Tapatalk
I helped a friend many years back with his conversion. His kit came with short harness extensions that did the wire repositioning. He didn’t think he needed them until he switched the headlights on and couldn’t figure out why the lights were dim and doing wonky things. Rather than use those extension harnesses I just moved the wires in the factory connector.
Sent from my iPhone using Tapatalk