Found this receipt in the docs the po kept. Hmm I wonder if that went inhttps://uploads.tapatalk-cdn.com/201...251f029cda.jpg
Sent from my SAMSUNG-SM-N920A using Tapatalk
Printable View
Found this receipt in the docs the po kept. Hmm I wonder if that went inhttps://uploads.tapatalk-cdn.com/201...251f029cda.jpg
Sent from my SAMSUNG-SM-N920A using Tapatalk
You need to get the pump from DMCH or Affiliate.
It comes with complete instructions with photos of all the steps involved. It's pretty straightforward.
You will be removing everything in the tank. Including the sending unit.
Sent from my iPhone using Tapatalk
Look about right? Dmc store. Not sure what dmch ishttps://uploads.tapatalk-cdn.com/201...6b40c660b3.jpg
Sent from my SAMSUNG-SM-N920A using Tapatalk
Delorean Motor Company (Humble, TX.) aka DMCH
Aka: Delorean.com
Yes that's the New integrated pump kit.
Sent from my iPhone using Tapatalk
Fuel pump is a very simple straight forward job IF you have all of the original electrical connections on your harness. The new kit from DMC will include a stainless steel blanking plug to put in the place of where your original sending unit was. Make sure that cover is screwed on tight! Also (IMPORTANT) one thing you want to pay attention to is the orientation of the check valve on the discharge line from the fuel pump. It took me about a week and a half of cussing and griping at my car before I realized I had installed the line with the check valve backwards. The side of the check valve has an arrow engraved on it that indicates the direction of flow. Make sure that arrow is pointing away from the pump.
Honestly, it should be about a 1 1/2 - 2 hour job once you get everything unbuttoned and your tools ready.
Look what came in the mail. Here goes nothing. https://uploads.tapatalk-cdn.com/201...fd193d064b.jpg
Sent from my SAMSUNG-SM-N920A using Tapatalk
Its like xmas :)
Good luck
Lol thanks. I'm off to get a syphen kit now. Gotta few gallons of gas in there I gotta get out. Step 5, empty tank
Sent from my SAMSUNG-SM-N920A using Tapatalk
Ok so here it is. Ready for install and I'm on it right now. I like the new pump bit the installation doesn't address it being as disassembled out if the box. The "gas low float" is not connected but they assume it is.
Sent from my SAMSUNG-SM-N920A using Tapatalk