Urethane?
Printable View
1002
Awesome thread!
So far I have removed the passenger door fixed glass. Also had to remove the strut as the door became too difficult to close with how bare it is right now. There is barely anything in it.
Now I'm cleaning up the stainless on the door for the glass and the glass itself.
Installed Henninger's door strut support brackets. So far so good, I'm letting everything cure a bit before I close the doors, but they were every bit as simple to install as others have already said. They're well made, and Mr. H is just a phone call away and very patient in answering questions. Installation was very strait forward and I do NOT think they "detract" from the appearance in any way, in fact I kinda think it looks cooler now. With all the after market door struts flying arround these days I think these or a comparable upgrade would be a wise thing. 1258 came with the original Stabilus struts and I replaced them with the ones PJ Grady had back in '07. They lasted a very long time and I noticed no displacement of the stock strut stud, however I've recently replaced the old Grady ones with Ed's "Soft-Lift" struts, I can't 100% say that's what caused my original studs to bend, but it was shortly after that, that I noticed they were pushed out a bit. So I made the call to go with Henninger's solution, for it's simplicity and ease of installation, I also believe they can stand a bit more stress. If any thing happens, I'll let you guys know.
-James
Installed DPNW's lower speedo cable. The speedo bounce is almost completely gone!
I added pictures to my Album #6313 showing the installation of the Velcro rolls and velcro patches on the underside of the escutcheon. This allows the escutcheon to be installed and removed as normal (albeit with a little more resistance from the velcro). When installed the Escutcheon doesn't move or rattle. Stable enough that using the door lock button or door latch doesn't cause the escutcheon to move.
I also adjusted my strike pins on the passenger door. I found the method of moving them into random positions somewhat useful, because I can't see any logic behind when they grab and when they don't - too many variables. I'm think there might be a lot of frame flex around the door frame. I never got to the beautiful click that some others have described, but I'm happy with no longer having to slam it to get both latches to catch.
Attachment 10054Attachment 10055Attachment 10056Attachment 10057Attachment 10058Jeff #6313
That's a very cool idea. Any chance of a more detailed writeup? Floating escutcheons are high on the list of things that bug me in the car, along with the walking switches in the center console. I fixed that already, but your escutcheon solution is elegant and cool!