The original gasket was asbestos. When I swapped out my oil pan, I cleaned off the asbestos gasket then used RTV silicone.
Type: Posts; User: r00b
The original gasket was asbestos. When I swapped out my oil pan, I cleaned off the asbestos gasket then used RTV silicone.
Sitting for 10 years doesn't seem that bad on injectors, if it was kept in a garage it should be fine since you are going to clean out the tank and replace the pump.
What country do you live in?...
Although the back plate may fit it won't be oriented correctly, using the delorean's back plate.
70488
The y pipe hose is on the opposite size of yours, that looks like a problem getting a hose...
You want the spiral in the back of the pump to match the pump from the delorean, it needs to be oriented the same. The 1980 Volvo 265 has the correct pump for the stock Delorean...
Looks like Jegs also sells one with a flange https://www.jegs.com/i/Derale/259/US9146/10002/-1
Best price I've scene in a while at $64.99.
Yeah, a lot of parts I want from DPI say next batch in production. Until they're back in stock you could get a water pump from advanceautoparts...
Okay, well I heard it first hand so I believe it.
I heard the story 10 years ago, I don't know how much time had passed since it had happened but he looked pretty annoyed when he got to the end. If anyone knows any older asian owners in the bay...
What part?
I've always thought a truck bed liner spray would look good on the pontoon. Have you considered that instead of painting it?
I'd like to see how those push pin fasteners turn out.
It looks like there might be 2 Bertones at https://bestautogeorgia.com/
I don't know if that's to far for you to travel?
Never mind, there may be one for a premier here...
A guy I met at a Delorean get together told us a story about his acrylic air box. He took is car to dmc ca, when he got it back it had the stock air box on it. He called them and asked why they...
I just agree with them, "Yeah it's aluminum, yup the v12 model, oh you had one in the 70's, yeah it's under powered cuz it weighz 12000 lbs, that's right machined out of a single piece of...
The reason they use stainless steel bolts with non stainless nuts is so they won't gall together. I had it happen on my trailer, I was was installing stainless bolts and nuts. most had no problem...
I got a new coil a few years ago, Napa had it in stock. How often does the resistor fail? I don't think very often. If you're worried about not being able to find one, you could just carry a spare.
We'll know for sure when someone finally get's their hands on one, personally I'll wait for an original. Heard it will come bundled with their binnacle. :hysterical:
Yes that's true, though it would be consistent with DMCH's greedy algorithm approach to everything.
I see. If it's just the muffler that is slightly different, maybe you could specially order if from them.
Could have been I haven't herd that one before though.
It would not be surprising to me, new cars have much thinner body panels than older ones. My Model T and A fenders are super thick...
Finding a used DPI exhaust might be difficult, maybe from someone doing and engine swap. You're more likely to find an used dmch exhaust as people are replacing those with the better DPI exhaust.
...
Because of a clerical error more rights were made then lefts. The seemingly low amount of lefts compared to rights caused people to horde them. The hoarders might now decide to sell their fenders. ...
Get if from a place like autozone, so when it goes out you can get a free replacement.
It looks like some BMW 5 series might have a compatible idle speed motor. I'll pick one up next time I'm at a wrecking yard and let you know if they work.
If you want your tires to match and be the correct sizes, you can get the hankook tires. Unless you are specifically wanting a different size? You can go up in size on the rears but I wouldn't do...
Here's the bar I use https://www.northerntool.com/products/grip-on-tools-jumbo-mechanic-s-breaker-bar-40in-model-67330-2567330
You can use any kind of scale with it, you just need to know the force...