I did and apparently the guy retired and the molds have been sold. I suppose I'm asking if there are any used or shelved sets out there.
Type: Posts; User: wfox2506
I did and apparently the guy retired and the molds have been sold. I suppose I'm asking if there are any used or shelved sets out there.
What's the status of body kits? I've heard from multiple sources that they are no longer being produced. I was considering getting a set, or at least the skirts..
Bump. Really interested in these.
No one has an alternative to the metal retainers? I'm about to blow half a paycheck on some replacements. =/
Looking to buy both door headliners, new, for a black interior. Vendors can't part out kits anymore and mine are missing. Thanks.
Interested in one but black is out of stock right now?
I got a screw into the elbow and let it pull the tab into place. Now the end of the tube is pressing on the drop glass so I think it's putting tension on the mechanism. I think I'll have to pull the...
I bought new window motors and I am test fitting them now. Looks like things are going together much better now. Just one issue.
The elbow bracket that needs to be bolted to the grab handle...
Fixed the WAL actuator. Screws were slightly too tight, causing some binding.
Moving on to replacing and adjusting the toll window. Nightmare situation. To keep it simple, the glass comes up and...
Thanks for the pics. I wound up buying a replacement rod when I realized the PO glued the turnbuckle in place (wondered why it wouldn't turn even though the counter nuts were gone).
So far...
Going through my doors thoroughly and running into lots of PO probs.
Firstly, the connecting rod to the driver side exterior lock is mangled. Anyone know where the factory bends are supposed to...
I think I tracked down a decent shop to do the repair.
Lastly, I need to replace 3 retainer strips when replace the grilles. The 3 retainer strips I need are going to run me $70+!!? Does anyone...
I'm nowhere near vendors. I removed the bracket and clip as I was getting ready to replace the grilles. Looked like the clip is what started the damage and it spread from there.
I just discovered this breakage near the latch of my engine cover under the middle retainer. Has anyone seen breaks in this spot? What's the best way to fix/reinforce it and still be able to secure...
I hope those boxes are not thrown away after purchase. That spark plug box is neato.
No, I'll be reusing my old one and apply window weld I suppose.
Cool, same thing someone else told me. For some reason I previously thought they changed the pigment of the factory tint at some point. I went ahead with an NOS part.
Looking for a driver side toll/drop window assembly (glass and hardware).
Also looking for:
Driver side door arm rest, black, any style
Passenger side door B post trim, black
Passenger side...
I have a large chip in the middle of my driver toll window and want to replace it so I can get my windows tinted.
If I want to get a late NOS part, do I run the risk of the window looking out of...
I got the car running great this weekend by just spending time on it. My problem now is that the IAC seems to do nothing. The IAC position value fluctuates, given whatever I'm doing, but it doesn't...
Ok, undriveable '81 car should pop up on ebay/craigslist soon. $20K.
I'm going to try some tuning this weekend after a couple weeks away. So this is where I stand:
Cranks fairly quickly but lazily with a very low starting RPM. It helps to give it gas to keep it...
There is one, I found the IAC readout and it's working.
Stock manifold, DPI stuff.
2 days ago the car wouldn't start but now its running pretty well, so I'm making progress on my own. Reading up on Holley forums and such. Only gets me so far since I'm...
Taking a crash course on how to tune with Holley V3. Got it running and driving pretty well. Working out kinks in the idle and AC use. Does anyone have a global file I could reference? Non turbo car.