FRAMING JOHN DELOREAN - ON VOD www.framingjohndeloreanfilm.com

Search:

Type: Posts; User: Ron

Page 1 of 20 1 2 3 4

Search: Search took 0.13 seconds.

  1. Thread: Parking Brake

    by Ron
    Replies
    5
    Views
    196

    [Brakes] Make sure that the other end of the cables and...

    Make sure that the other end of the cables and sheaths are adjusted where the swivel starts off square and even when you pull the handle...
  2. [Wanted] Sorry, my mistake! I left it the first time...

    Sorry, my mistake!
    I left it the first time through. It was read but later quoted in one of six 'not interested in selling' posts, and got caught up in the mess...
  3. Replies
    23
    Views
    370

    [Suspension] ??? No. Read my previous post...

    ???
    No. Read my previous post...
  4. Replies
    23
    Views
    370

    [Suspension] +1 ====== There's good chance it is the...

    +1

    ======

    There's good chance it is the right piston not moving, leaving all of the work (and pull) to the left side. ...Being why checking what heats up and when for clues to whether it is a...
  5. Replies
    23
    Views
    370

    [Suspension] Check for signs of a HOT rotor...or one getting...

    Check for signs of a HOT rotor...or one getting hot well before the other.

    Hung piston?? Check that both come on and release at the ~same time.

    EDIT: If it is double-nutted, you'd need to...
  6. Replies
    23
    Views
    370

    [Suspension] If it's not not double-nutted, maybe guesstimate...

    If it's not not double-nutted, maybe guesstimate how much it takes to loosen it with a torque wrench to see if is seized??
    ...Which would mean you'd have to take it to an alignment shop anyway.
  7. Replies
    23
    Views
    370

    [Suspension] Yep; stabilizer bar = anti-sway bar = anti-roll...

    Yep; stabilizer bar = anti-sway bar = anti-roll bar.
  8. Replies
    23
    Views
    370

    [Suspension] +1 Bitsy Stabilizer Bar Lower Control Arm ...

    +1 Bitsy


    Stabilizer Bar Lower Control Arm
    INNER-OUTER 44 lb. ft . - 68 lb. ft. (60 Nm-90 Nm)

    Stabilizer Bar Pivot (on Chassis)
    26 lb. ft.(36 Nm)
    Workshop Manual A:02:03
  9. [Wanted] Missing posts? Please review the Sticky...

    Missing posts?

    Please review the Sticky titled", ***-SECTION-RULES-***-Please-READ-BEFORE-POSTING-***".
    RE:
    "1. Items posted for sale in any section must be for items you personally own. Do not...
  10. :welcome:

    :welcome:
  11. Replies
    20
    Views
    813

    [Electrical] Assuming you also put the battery jumper's...

    Assuming you also put the battery jumper's positive wire on the main alternator terminal since it put out... If so, it should work on the car if your small brown with yellow trace wire measures 12V...
  12. Replies
    41
    Views
    1,246

    [Engine] ​That's NOT what she said!

    ​That's NOT what she said!
  13. Replies
    95
    Views
    3,708

    [General] +1 (Stressing, "evenly";-) ...Keep the race...

    +1 (Stressing, "evenly";-)

    ...Keep the race mated with its bearing.

    Maybe tape off all of the mating surfaces before blasting depending on the soda...
  14. Replies
    3
    Views
    224

    [Fuel] The FV adjusts the fuel mixture, so you need...

    The FV adjusts the fuel mixture, so you need it....Hopefully one of the carb guys can hook you up!
    Maybe, place an ad in the Wanted section here.

    If you want a rebuilt unit and the vendors want...
  15. Replies
    18
    Views
    445

    [General] If you adjusted the selector linkage per the...

    If you adjusted the selector linkage per the manual, I'd suspect something worn or the cable sheath is not secure, I.E., not getting full travel at the bellcrank.
  16. Replies
    18
    Views
    445

    [General] I think I see what you mean, but they are ground...

    I think I see what you mean, but they are ground controlled.
    The two solenoids fed power when the key is in the run position. The GC circuitry determines when to ground them and turn them on: both...
  17. Replies
    18
    Views
    445

    [General] Some do some don't. My 99 Ranger will start of in...

    Some do some don't. My 99 Ranger will start of in 2nd, like many pickups and older Fords. Same for the 96 Blazer, but not the 89. Besides lowering torque, many demand to prevent the transmission...
  18. Replies
    18
    Views
    445

    [General] FWIW, the D manual calls the functions '1ST Gear...

    FWIW, the D manual calls the functions '1ST Gear "HOLD"' and '2ND Gear "HOLD"'. Depending on the transmission, it can be a "Demand" AND/OR a "Request".
    They are requests for Deloreans. One...
  19. Replies
    95
    Views
    3,708

    [General] FWIW- "103123 BALL DETENT" is listed only 4 times...

    FWIW- "103123 BALL DETENT" is listed only 4 times in the parts manual...
  20. Replies
    18
    Views
    445

    [General] Oops! I meant to say "always" not "never"...

    Oops! I meant to say "always" not "never" shifted... :shameful:

    Since you say it acts normally in D etc., I would suspect the multi-function switch is is not passing ground to the GC board. Two of...
  21. Replies
    18
    Views
    445

    [General] To be sure- If you stop, put it in 1st, and then...

    To be sure- If you stop, put it in 1st, and then accelerate, it never shifts to 2nd, correct?

    Perform the adjustments in the Workshop Manual G:05:02. (D/L HERE)

    Refer to the diagnostic chart in...
  22. Replies
    1
    Views
    149

    [Electrical] Here ya go: 63002

    Here ya go:
    63002
  23. Thread: Ground

    by Ron
    Replies
    9
    Views
    320

    [Electrical] It's just for noise suppression....Older point...

    It's just for noise suppression....Older point type distributors use similar looking condensers to prolong the life of the contacts, which a D does not have.
    Not required to start/run for either...
  24. Replies
    3
    Views
    239

    [Electrical] lol 13V sounds right if one of the 6 main...

    lol

    13V sounds right if one of the 6 main diodes in the rectifier are bad.
    A "bad resistor" usually refers to a shunt resistor that rests on top of the voltage regulator/brush holder of an older...
  25. Replies
    3
    Views
    189

    [Fuel] Sounds like it is something else to me since it...

    Sounds like it is something else to me since it dies at idle but the pump is strong enough to keep up while driving it down the road. And, usually, electric pumps get worse as they warm up, not...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4