Search:

I just got off the phone with the guy from Winter Garden not having looked the car up on this thread before hand.

Here's what I know:

Car was hanging in a casino for many years, rich guy in...

Sorry for the delay, the car was sold last week to a 22 yo in North Dakota

I tinkered with the car a bit today and now have the fans kicking on at 208 degrees as they should, otterstat is no longer bypassed.

I also managed to wedge myself under the dash and the wobble in...

As seen on Ebay......

Ok, forget that message, I missed one of the fuses, ran a little rough at first, but now runs fine.

On to the next 2 issues...

Fans still not kicking on with bypassing otterstat. Replaced...

OK, so car is now reassembled and to my surprise with no extra parts or missing parts. (I found the otterstat clip, of course after purchasing a new one)

So here's my dilemma, I put the fuse back...

Loop eye it is..

Spade connecter, not sure of color as the car is in my shop

Also, which belt is larger, ac or alternator? I bought both, but they weren't lableled and the old ones are...

So I've managed to disassemble my intake, clean the valley, and now attempting to reassemble. problem is it's been a few weeks since I took it apart and a few "extras" remain.

1. To what spec...

Your logic is so logical.

However, sometimes venting makes everyone feel better, that's why everyone has an a**hole right? lol

Have you scientifically tested how fast shit goes through a goose, or is this based on observation?

On another note, I 3rd the talking to Julee from DMCMW, I ordered in the afternoon on Wednesday...

For the most part my car is setup just as the diagram depicts, there is however one difference.

Between the reservoir and the Tee coupling to the hot water valve, there's a Tee about 6 inches from...

You had mentioned that the reason I'm not getting heat is because you believed there was a chance the heater lines were crossed. Now that I've got it apart, can you give me an idea of where the lines...

OK, well now I'm back to square one, there was definitely oil along the bottom of the intake, but the port I thought it was coming from the intake although definitely black and looking the culprit...

Isn't the oil running through the intake pressurized? If both bolts on the passenger side of the intake were loose, wouldn't that case oil to bypass the intake gaskets and leak down into the valley?...

I don't think there would be much that could be done with the AC belt broke being in it's current mangled multiple piece state.

I did however manage to snake my way though a load of fuel lines and...

Sorry for the delay, not getting notices saying people have replied to my posts.

Whatever day and time works best for you, I can make it work. Thanks!!

19051

[QUOTE=dmc6960;102853] I could assist with this if I can find some free time, but I don't think I'll have any until NEXT weekend.

QUOTE]

That'd be great, I checked the relay panel, looks like...

Not if they fly....

correct, to be relisted as soon as i take care of his minor set back

Had my car sold via Ebay, the guy who came to get it felt he could drive it from MN to FL. The car hasn't seen 1,000 miles in 8 years, but he thinks it can do 2,000 in 3 days. (Genius)

Anyway,...

As stated, I am asking $18k, nothing said the price was firm.

Also, please follow the ruls as outlined on this forum.

3. A person may sell their item for whatever price they want. Please do...

Here's some better pics:

The center console is actually in really good shape other than the shifter bezel. The dash has glue on it from the carpeted cover being glued down. The engine cover is...

18248

Although not a pic of my car, this is the vent that is presently missing. DMC has it priced at $37.

When I get it back from being detailed I'll have it in my warehouse in Spring Lake Park, I'm there weekdays from 9-5pm, I'm more than happy to have you come in and check it out and encourage it as...