Having the same issue. Did you figure out what was causing the high idle?
Type: Posts; User: Rokkinlen
Having the same issue. Did you figure out what was causing the high idle?
What ended up being the problem?
I have the same symptoms. Do you remember what your problem ended up being and what the solution was?
This is great!! Thank you SO much. It came in super handy yesterday when I got down to the VOD.
—————————-
Do you have to take all the hoses off? I am going into my VOD and already replaced all my fuel lines last year. I was hoping to leave them connected to the FD and just...
When you had this issue, did turning the AC on bring the rpm back down to normal? If so, what do the deceleration valve springs have to do with the AC compressor? Any ideas on how to troubleshoot?...
Thanks, I'll try this. I've only filled up my car a handle of times so far, and the gas pump usually kicks off a bunch of times before I finally overdo it and have gas coming out and going down the...
VIN 3195 in Woburn!
Rob, do you still have the inconel TABs available?
Any update? Was it the O2 sensor?
I have creaking on my front end that is most noticeable when I'm turning out of my driveway which slopes down to the street. I know next to nothing about suspension, so I was hoping you could let me...
Ron, you are the MAN! The hoses were swapped. Now it idles around 800 rpm and sounds much much better. I can't figure out why the AC compressor would have caused the rpms to dip under that swapped...
When I removed the electrical connector from the vacuum advance solenoid, the rpm’s went down from ~1500 to ~800. But that was when the car was warm. I don’t know if it closed off vacuum to the...
Okay, so it sounds like it could be my springs. Do you think I should inspect them first or are there easier things I can troubleshoot beforehand?
__________________________________________________________
Thanks for the input everybody! As for the AC mode switch, that was actually my first repair on my car a couple months ago. No hissing...
My D is a little rough when started from cold, but a little gas helps it start around 775-800rpm. What concerns me more is that as it warms, the rpms go to 1000 and plateau at 1300 or so. The weird...