Onto the final chapter in the brake overhaul we leave off with the parts arrival for the rear calipers. With that the calipers are reassembled with the new parts and de-greased bolts torques to...
Type: Posts; User: jcrubin
Onto the final chapter in the brake overhaul we leave off with the parts arrival for the rear calipers. With that the calipers are reassembled with the new parts and de-greased bolts torques to...
Now into the third chapter in the brake system overhaul. We've left off with the completion of work on the front brakes as well as new flex lines up front. Wheels cleaned and reinstalled. The back...
In the second part of the overhaul series we continue with the assembly of the front driver side caliper with the new parts that had arrived. This included new EBC pads as well. The Flex lines...
This video begins a four part series which will consist of a complete brake renovation on this 1982 Delorean. All of the calipers will be rebuilt, the master cylinder will be replaced, though I'd...
This video documents the work that was conducted to upgrade this 82 Delorean to LED's as well as the usual round of repairs that were done along the way.
Many of which are the same issues that all...
Sorry, I was getting zero notifications about replies.
From rafael
Along with a Gates 7485 Belt
...
The second half of the video continues off with the disassembled,cleaned and stripped factor alternator of the Delorean. With the bearings arrived I toss them in the freezer while I prepare. I...
While Elvis and I were working on the car cleaning grounds and connection in an attempt to solve for some electrical issues, i'd noticed a visual indication that there was trouble with the...
Resistance might have been a poor choice when I requested a measurement from such a coil, but its generally what everyone uses. A company's specifications would most commonly use inductance. i've...
https://i.imgur.com/FgVETM8l.jpg
I should rephrase...
I have the alternator completely disassembled. And am measuring across the rotor commutators for resistance.
Does anyone have any documentation with regard to the resistance values for the windings for the coils within this original Alternator. I'd like to know if possible.
Thanks,
Jordan
Woo hoo we got a lot of stuff fixed too.
No torsion bar fatalities and one near death experience. Better the socket than the bar I suppose.
In the very last minutes of the meeting id had...
Yes there was a lot of water coming from under the car.
Running 134A at about 70 degrees ambient temp today. Looks within spec and blows cold. any thoughts.
http://www.youtube.com/watch?v=U--NIh1OdlM&feature=c4-overview&list=UUuN48bg_NnD7kMXBkII7aUw
Thanks for the responses.
The area previously suspect was not the dye but a glue reacting to the UV light. Ive cleaned all of the fittings and will be checking again... I noticed a possible...
No doubt my hoses are leaking. The Dye said so.......
That being said, Im looking at the two piece ones from Hervey. I was wondering if anyone has any comments on the hoses and the...
I don't get involved in Drama.....
I will point out however, that I have been buying parts from John for 10 years now on two separate continents. Aside from minor issues here and there I have no...
Anyone else you know of.
New movie on the way
Any owners in and around this area of Florida. Just curious. Just me and Rene as far as I know.
It took a few tries, but I found the right location for the camera
http://www.youtube.com/watch?v=0EIseKxojQ8
Jordan 011613
I would have to say no. That being said, my up and coming replacement of the AC hoses would keep it on the road during the summer months.
I finally joined the forum. Only took like 10 years, but what the hell.
Jordan 011613