Search:

Anyone have a suggestion on cleaning the out side of the engine covers? Or just general cleaning methods. I try to wipe up dust and dirt with a dry rag. The whole engine is powered coated stage 2...

Thanks, I feel like a dork. Didn’t even occur to me to check the break fluid switch. I did top it off in October of 2015, never a sign of a leak or weak breaking.

Trying to turn off my brake light on the dash. I checked the e-brake switch. The dash light does turn off once in a while when I hit a bump in the road. I think it’s a loose ground wire. Looking...

I'm pulling the Delorean out in a few weeks. I need to change the oil and coolant, this will be my first time doing this by myself. I have a 2011 stage 2 motor, what is the recommended oil and...

I have the car back up and running thanks the Dave and Mike at DMCMW. I still have a flashing battery light when the key in set to on. Could that be caused by a bad connection of the *new* alternator...

Will do. But my dealer retierd a few months ago. ;-). I just ordered a few parts from Mike last week and talked to his wife.

I grounded the brown /red or pink and the light came on. The old plug from the factory is still in the wiring loom. I installed the new altanator per DMC instructions that came in the box. It's the...

Light came on when I grounded the plug. So it looks like a new altanator for the car. Is there a warranty on the altanator from DMCH? I'm sure I got it back in October. Thanks for the help Dave.
...

Thanks I will do that. Now just to be clear - unplug the connector from the altanator with the single brown wire and ground it to a ground wire.

I hope it is that simple.

Ok. Back in October 2015 I changed my altanator, belt and battery, drove the car till late Dec. had it back out and driving from March till now.

Noticed battery light flicker when the ignition...

Ok got it, just opened it up, it's at 1/2 between min and max. Just a hair so the sensor is not closing. No breaking fluid leak, I did just take it out of storage and it's been 4 years since its been...

Any dot 4 break fluid will work? Another dumb question, to fill the break is at the top next to the gas cap correct?

Checked e-break wiring. No problem, check fluid next to gas cap, it's half full, removed plate by spare tier, removed black plug, break light off, fluid "looks" ok. I have never had break problems or...

I'll check the wiring under the seat. All things to do with breaking (except new pads) have been fixed or upgraded back in 2011ish by DMC-MW. But I will also check the fluid today.

This started last fall before I put the car in storage. Break light stays on all the time. I disconnect the wiring to my e-break switch but it still stays on. Any ideas?

Still available. It's 81 hood no gas flap.

15852

15853

I picked up a 82 grooved hood that needs to be fixed up.

Has no carpet
Missing left side hing and fiberglass
Has small dent in hood (1/4 straight line)
Front right to left about 1ft 1/2 line...

I did for the insurance but an off the street guy is not going to pay $40k for the car.

I am NOT selling my car! However I do need a "Street value" on my Delorean. The wife and I will be buying a house in the spring time and the bank would like to know about my valuables. They would...

http://sphotos-a.xx.fbcdn.net/hphotos-ash4/286753_272714226088435_4290702_o.jpg

You have to remove the hood to get to the screws. There is a fiberglass support that slides into a slot on the front top of the fascia. There are about 8 bolts that hold it together. The support is...

I have hood im going to be fixing this winter and I'm looking to remove the fiberglass support "X" from the hood. The glue holding in the "X" panel is 30 years old and should release from the...

Im looking for a hood attachment plate. It's the "floating" plate that is at the bottom of the hood where it attaches to the hinge.

Or a very very very badly damaged hood.