Search:

Shouldn't be that bad at all if you have a machine shop do all the hard work, assuming your carrier pivot bolts aren't seized in the bushing sleeves.

Well that's what I'm saying. I am going to see what he thinks about it, he might decide to cut a square out of the film where the pad is so I can stick directly to the windshield again. I would...

I've been planning a 4-day road trip in my DeLorean for next month so I've been focusing on making sure I'm ready and reliable for all situations on the road. One thing I've been thinking about...

I wouldn't bother. Once you break all those M5 screws off and install new rivnuts, you'll have no trouble going back in there in the future if for some reason you have to clean or check the...

Well it's one of those gaskets that's impossible to replace without lifting the engine if it happens to leak. Well, actually it's not impossible but it's nearly impossible to do a good job of...

If you're going to put those lights on, I wonder if centered in the sides of the pontoons is actually better? There's not really much to see if you're putting them under the rear window. I feel like...

This project will take tens of thousands of $$$$, what's another $350? New injectors yes.

Sent from my Pixel 6a using Tapatalk

Hard to say, man. If there is a valve cover leak, that should be totally obvious just looking at the valve cover and where it sits on the cylinder head. If it's dry, the oil you see on the threads...

When I did my frame off I bought almost all my hardware from them. I always order double or triple what I needed so now I have a nice Rubbermaid bin organized and full of nice fresh hardware so now I...

It is in the y-pipe and has a black two-pin Bosch plug going into it

Sent from my Pixel 6a using Tapatalk

Sounds like you're on to something!

Sent from my Pixel 6a using Tapatalk

You should have 8000 - 12000 ohms on the thermistor when cold. If it's open circuit then yep it's either bad or the plug is disconnected, if you are trying to measure it at the ECU. Where are you...

That should definitely not be necessary but hard to argue if it works! Is the rear guide out that far also? Kind of sounds like someone glued the glass into the carrier incorrectly and this is the...

Here are a few pics of a good one...

The tollbooth windows can be very reliable but they need some updates if you haven't done it yet.

Replace the regulator for sure with a current version, also replace the Velcro strips adhered to...

yeah it's painterdave72

Pretty sure David Hudgins did exactly that, with the push fasteners.

Sent from my Pixel 6a using Tapatalk

Can't see how your meter is set or what setting it's on so pretty hard to tell you anything helpful.

Steve Bano reports that this light fits and is quite bright but very cold color -
...

Yes the lamp fits inside surprisingly loose. Guess I've never had it fall out (yet).

Thank you!

Trying to figure out what my next project will be. I might fit the Euro distributor weights I bought earlier this year. I should also replace all the front fender top screws, they...

Take Your DeLorean to Work Day! I couldn't resist taking a picture of the hood fully installed and in place.

70422

LOL. It's called make use of what's just laying around!

70416

I completed the hood seal install this weekend and let me say it is a trial of patience and something that absolutely cannot be rushed. It actually took me about two full days to install the seal...