Search:

Yes, I've "been there, done that" with those original gaskets and an air angle grinder with a medium abrasive pad on it makes it go pretty quick as long as you don't bite into the aluminum. The...

Thanks fellas, I'll put the silicone one back up on the shelf and reorder all the lost parts, this time using fedex!

Is there a reason silicone oil pan gaskets are no longer available? Did they leak? Should I not use it and stick with the fiber gasket? I have searched and cannot find anything about the silicone...

Found what I was looking for, this can be closed.

Now I see it, this is why I shouldn't comment when I don't have the parts side by side - everything I'm looking at is upside down/backwards. Ron, delete my posts lol.

Can't modify the back cover. The outlet to Y pipe is not the problem, it's the smaller outlet for the return line. You could cut the return pipe down and use a longer heater hose from the cover to...

I was just able to compare parts and it turns out I am wrong here, Eagle/Volvo back plates are the same thing, same part number. The DeLorean back plate is different in that the coolant return pipe...

To be honest, I don't know of any replacement pump that comes with a plate on the back; they're usually sold separately. You'd typically clean up and reuse what you've already got from the pump...

If you want one for a bolt on pulley, look at the 1987 Volvo 780 Bertone 2.8L water pumps on rockauto, amazon or ebay. Same thing as the DeLorean for 1/3 of the cost. I just bought a closeout pump on...

I have a new, sealed set of rod bearings for the DeLorean 2.8, just delivered from DeLoreanGo. I didnt take my own advice from years ago stating they dont fit the even-fire engines, so I cannot use...

Eastwood is not the only one who sells the tool, you can also pick it up on Amazon, just search "burnishing polishing machine" and you'll get a list of them, some less than $80. You can also get the...

Other options below:

Deloreango offers their version of a flap tool:

https://www.deloreango.com/us/regraining-flap-wheel.html

There are also an assortment of heads you can use from Eastwood,...

That is awesome, thank you for posting that. I will see if they have that eagle engine still, it's not too far from me.

You could also go this route instead of the tape:

https://dmctalk.org/showthread.php?16893-Door-Edge-Guard-from-Amazon

I am in need of a good engine block: a B280F block from a Volvo 780 Bertone or the Eagle 3.0 block would be great if someone has acquired one for a swap but didn't end up doing it. The few blocks...

Thanks, I figured as much. Seems any method of repair would cost more than it is worth with all things considered, so I'll have to look for a good block. Sucks because I sold a perfectly good block...

Have have two PRV blocks, both of which were left with coolant standing in them for an unknown amount of time. The coolant has eaten its way towards the cylinder liner as you can see in the photos. I...

Disregard this question. Upon further inspection today, some of the metal shims are broken, so it?s back to paper!

When I am ready to reinstall the liners, can anyone tell me if I am fine to reuse the steel liner seals/shims that were originally on the liners when I removed them and should I use hylomar on them?...

It would seem to me that all one would have to do is compare the weight of the new vs old.

Thanks for the insight fellas, I 'preciate it. Just dashes wants $2300 + shipping to restore the pad & glove box lid and while the money isn't a problem, the 4-5 month wait, is, and that is if I got...

Correct, looking for actual dash pad options. So I guess it is either Just Dashes, DMCH or recovering the damn thing again.

I've been out of the loop for some time, and since I've been installing some electronics under the dash, I feel now would be a good time to replace the pad since the covering I originally put on it,...

Wow....you do realize that lots of companies pay marketing agencies and this is the result of what the marketing agency did, and not Josh/DPI - who I'm sure have nothing better to do, right?, did...

A ring gear is $180 + shipping, then all the work to remove the old and install the new one and then balance. A refurbished flywheel is $300 so it might not make sense to go through all the ring...