Hi Deloumis,
I bought VIN 883 from you and have it, I would change this thread so it is not confused that people think you are selling 883. I offered to buy the other car at the same time for 15...
Type: Posts; User: Jpalatinus
Hi Deloumis,
I bought VIN 883 from you and have it, I would change this thread so it is not confused that people think you are selling 883. I offered to buy the other car at the same time for 15...
David T has a lot more experience than me on this, but my engine hoist wouldnt reach high enough to lift an open door. The doors are heavy but not engine heavy. I did have the fortune of having an...
I just did my roof box and can attest that using a hoist is the best way to take off a door single handed. I bought a 600lb support host from harbor freight for about 200$. placed a rope through the...
I Had my original front fascia repainted and it looks gorgeous, but I am concerned it may have shrunk. When I took it to the body shop I had left the retaining strip and reinforcement piece on. The...
Just to clarify you CAN remove the Paris Rhone starter with headers present, I have the DMC stage 1 exhaust and did it quite easily) you have to take the solenoid out and take the starter apart while...
I have actually had much success routing the stock main harness back through the left fender area. Firt I used fish tape through the foot well hole and it is stiff enough to get to the washer bottle...
Will Hagerty just handle it?
I am curious because after having a poor experience with a third party insurance covering someone who hit me, and after talking to USAA (my insurance), when I am not...
Looking for a black on for passenger side, just the backing piece part# 108058, I read a few posts of people throwing them away so thought I would ask if anyone has one they would be willing to part...
Thanks
im due to change the oil as well so i will check that, though the car runs great and no white smoke in exhaust etc. And no detectable exhaust gas in coolant i am always scared when i overheat...
Also i now think the otterstat switch itself is functional i noted this time as it came up to temperature the coolant pipe where the otterstat sits was actually cool to the touch despite the engine...
Thanks for the comments i grabbed a combustion gas analyzer and went to town sucking the coolant vapor through from the expansion bottle and saw no color change in the bottle i allowed it to get to...
I drove 6808 to work yesterday and after about 10 miles driving with ac on i note the temperature was 240 and and steam was coming out of the back. I quickly shut her off and parked. She has never...
Thanks for that picture,
I am in the designing stages of an ev project t like this and hoping to replicate the fitting of 8 modules into the frunk. The DeLorean frunk has about 28 inches front to...
Wow that is awesome, i had been looking at trying to fit modules in the fuel tank area but their solution probably makes the most sense. And i agree the weight thought slightly more than stock is...
Well it does look like it I coming along
DO you know how many Tesla battery modules they are using?, it looks like 8 Tesla modules in the back there. My limited understanding of the Tesla drive...
I am so glad you posted this, i had been following your posts and I was actually talking to ev west last week about sending me a kit for converting a delorean they said sure i would just need to make...
I have been having intermittent no crank issues which i had had been attributing to the starter solenoid. I would turn the key and nothing would happen and then open and shut the door and she would...
Wheel werks in salt lake city, ask for Mike. He will hook you up. I stumbled upon them and qas really impressed. https://uploads.tapatalk-cdn.com/20211231/7d12e15cc4e99ae305d7a060c4b37f4a.jpg
...
I dont know about the susceptibility to chipping, but i suspect the subsequent clear coat helps prevent that. The one thing that is less than ideal is the wheel cap does protrude about a half...
When the wheel spins on the lath to be machined so you have the machined finish on it the lath misses the low spots. So i had them powder coated first, machined to bare metal and then clear coated. ...
I had a set of after market wheels for a long time on 17167 and i had sold the original wheels off in the early 2000s for a song to a friend. One of my after market rims became damaged and...
Can you take a picture of the current state 9f the cars right now? If the body is off the frame. Do you have it on rolling dollies or something currently? i am imagining both cars cant be rolled so...
Anyone hear from Josh recently? I sent wheels to him in May to be refinished, he was very responsive until august, always telling me they would be ready very soon, and since then I haven't been...
hello, i have been inactive for a while but i finally got abhouse with a garage and got my deloreans back with me. I am now in salt lake city and would love to connect with other owners in the area...