Search:

Anyone have any starter cores send me a message. Complete units only. Non-working.

Sold

Still available. Guy paid deposit but couldn't get the cash... ugh... $13,000.00. Has over $6500.00 in new parts etc...

Come on down.. car inside garage now. Hoist available to look at everything.

Details here:

http://halifax.kijiji.ca/c-cars-vehicles-classic-cars-1981-Delorean-DMC-12-W0QQAdIdZ463294578

Vin 3133 $16,500.00

Well, tested fuel injectors with old fuel distributor.. but with new distributor showed 3 bad. Had 3 here that came with the car.. replaced and the engine was running fine!! Put everything back in...

Looking for an idle speed ECU

Cheers.

Fuel Pump.. checked everything correct. Reinstalled double checked hoses. All correct. Filter clean. Headed to accumulator.

I was running for the car thinking how embarrassed i was going to be.. hehe

Yes, I have a plug but it is out right now.

Some pictures. Yes the hose is missing between the cold start motor (regulator) and valve. The idle speed ECU is bad so was just by passing it for now. When I got the car there was no idle speed...

Yes, I'll do that. First installed was fuel pump, filter and accumulator only because the car sat so long. The other stuff I'll write down and try to get some pictures up asap

Ground was already checked. All ok there. Going to start from scratch from the fuel pump back. I know it's going to be something stupid.

and if there is a Delorean Mechanic close... message me!! :)

Never replaced all the parts at once. Sure wish there was a Delorean mechanic close by.. #@$@#!! Seems like I been over my work at least twice.. everything from plugs to wires. Hoses to...

Hooked Dwell meter up.. stays at 45 .. doesn't move. CO2 sensor?

Thought of that but fuel pressure doesn't drop coming from tank. And it has a new filter as well. Besides for idling, it has no miles on it except for the ones we pushed. lol

Yes motor did run good until I started to replace missing parts.. we did compression check all ok.

I should say some how the motor did run cause it was drove on to the transport carrier. However after installing "missing" parts in an attempt to return it back to normal.. then the issues started. ...

That's putting it mildly. :) Time to get a Dwell meter!

Ok.. then that works.

No vacuum to Fuel Regulator. hmm

Seems like I got vacuum issues.. like none. um.. hmmm

Sorry missed this... pressures are ok.

Yes it is.